Scheppach PM1200 User Manual

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
GB
|
21
14. Troubleshooting
Problem Possible causes Remedies
Engine does not
run.
Engine, cable or connector defective,
fuses burnt.
Have the machine checked by a specialist. Never repair
the engine yourself. Attention! Check the fuses and
replace them if necessary.
Engine does not
reach full power.
Circuits in the network are overloaded
(lamps, other engines, etc.)
Do not use any other devices or engines on the same
circuit.
Motor overheats
easily.
󰀩
cooling of the engine.
Avoid overloading the engine during mixing and remove
dirt from the engine to ensure optimum engine cooling.

Scheppach PM1200 Specifications

General

Type	Cement mortar
Volume	0 kg
Substance	Liquid (ready to use)
Frame color	Black, Blue
Empty drum volume	0 L
Rotational speed (max)	700 RPM
Rotational speed (min)	0 RPM
Suitable for materials	Concrete
AC input voltage	230 V
Power source type	AC
AC input frequency	50 Hz
Maximum input power	1200 W

Weight and Dimensions

Weight	4800 g