SCHEU MINISTAR S User Manual

Bedienungsanleitung
Operation Manual
SCHEU-DENTAL GmbH · P. O. Box 75 62 · D-58613 Iserlohn · Tel. +49 2374 9288-0 · Fax -90 · www.scheu-dental.com
D/E 34.01/3.000/02/05 G Art.-Nr. 0180.1
Der neuartige kurzwellige Infrarotstrahler kann bei Schwarzanteilen in den Tiefziehmaterialien aufgrund
von höherer Absorption verkürzte Heizzeiten erfordern; bitte Hinweise auf Materialetiketten beachten.
Due to the new short-wave infrared heater heating times may have to be reduced when pressurizing
plates with black content because of higher absorption; please see hints on material labels.
Abkühlzeiten können problemlos verlängert werden.
Bei Bedarf kann die Abkühlzeit durch konstanten Tastendruck (5 Sekunden) der “air” Taste unterbrochen
werden.
The cooling times can be prolongated without any problem.
MINISTAR S
®
Heiz- und Abkühlzeit-Tabelle / MINISTAR S
®
heating and cooling time chart
Heizzeit
heating time
Abkühlzeit
cooling time
25 30
30 40
35 50
40 60
45 80
50 100
55 110
60 120
Heizzeit
heating time
Abkühlzeit
cooling time
65 300
70 300
75 140
80 160
85 160
90 300
95 180
100 180
Heizzeit
heating time
Abkühlzeit
cooling time
110 240
120 240
130 240
140 300
150 300
160 300
170 300
180 300

SCHEU MINISTAR S Specifications

General

Brand	SCHEU
Model	MINISTAR S
Category	Dental equipment
Language	English

Summary

EU - Declaration of Conformity

Operation Manual

Connecting and Setup

Instructions for connecting the main cable, air supply, and setting up the device on a work surface.

Front Panel Overview

Description of the operating elements on the machine's front panel, including switches, LEDs, and buttons.

Heating Process Activation

Details on activating the machine, programming heating times, and starting the heating process.

Model Preparation

Guidance on placing and securing round foils on the adjusting ring within the pressure chamber.

Pellet Container and Sealing

Information on the removable pellet container and the metal plate that seals the deep pellet channel.

Heating Process Completion

Signals indicating the end of the heating process and instructions for turning the heater and chamber.

Cooling Process and Depressurization

How acoustic and optical signals indicate cooling end, and steps for depressurizing the chamber.

Fabrication of Positioners and Splints

Using programmed time intervals with a heating support for specific fabrication tasks.