The following is required by the roughly 9,542 government agencies
and regulations we have to comply with. If you have some common
sense, they should seem pretty straightforward. In any case, read
these instructions before proceeding farther, follow all instructions, and heed
all warnings. Or else!
1. If you don’t know how to install audio devices, get a qualied professional
to help.
2. Never use this device near water, and clean only with a
dry cloth.
3. Assure adequate ventilation, do not block any ventilation openings, or place
near heat sources.
4. Use only the supplied power cord or suitable replacement. Route cords away
from trac areas and protect them from being pinched. Unplug the cord from
the outlet if the apparatus is unused for a long period of time.
5. To prevent electric shock, do not use the plug with an
extension cord, receptacle, or outlet unless blades can be
fully inserted.
6. Refer all servicing to qualied service personnel. Service is required when
the device has been damaged, including cord or plug damage, liquid has been
spilled or objects have fallen into the device, the device has been exposed to
rain or moisture, does not operate normally, or has been dropped.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS DEVICE TO RAIN OR
MOISTURE.
INTRODUCTION
Loki Max is, to put it frankly, a completely bonkers
equalizer. Where most EQs are content to be boxes of
sub-standard op-amps and scratchy slide pots (or software
that lives on your computer only to irritate your spouse,
grandmother, and other sane human beings), Loki Max is
a microprocessor-controlled, relay-potentiometer, all-LC,
all-discrete, remote-controlled retrofuturistic tour de
force. Really the only question is who is crazier—us,
for making it, or you, for choosing it?
IN THE BOX
(1) Loki Max
(1) Power cord
(0) Tubes (oh gawd no please)
(0) Stick-on feet (they’re pressed in)
(0) Wall-warts (they’re not needed)
To Next Page
Loading...