schildknecht DATAEAGLE X-TREME 3715A User Manual

Installation and commissioning manual
Wireless Profibus System
DATAEAGLE® 3XXX X-treme
Schildknecht AG
D -71711 Murr – Haugweg 26
Phone +49 (0)7144 89718-0 - Fax +49 (0) 7144 8971829
Email: office@schildknecht.ag - Internet: www.schildknecht.ag
DATAEAGLE 3XXX X-treme
Version: 14.04.2020

schildknecht DATAEAGLE X-TREME 3715A Specifications

General

Brand	schildknecht
Model	DATAEAGLE X-TREME 3715A
Category	Microphone system
Language	English

Summary

Safety Instructions

Installation Safety Instructions

Safety guidelines to be followed during the installation process.

Operation Safety Instructions

Installation of New Devices

Installation Overview

Install Radio Module

Instructions on how to physically mount and fasten the radio module.

Install Antenna Cable

Guide on connecting the antenna cable to the radio module.

Connect PROFIBUS and Power Supply

Instructions for connecting the PROFIBUS plug and power supply to the device.

Power Supply Connection Requirements

Extension and Exchange Procedures

Install USB Drivers

Steps to install USB drivers for PC-module communication.

Install Dataeagle Wizard

Instructions on how to load and install the Dataeagle Wizard software.

Configure Radio Master

Steps to connect and prepare the Radio Master for configuration.

Configure Radio Slave

Steps to connect and prepare the Radio Slave for configuration.

Module Exchange Overview

Example 1: Exchange of a Radio Slave

Detailed steps for exchanging a Radio Slave, including wizard connection and configuration.

Example 2: Exchange of a Radio Master

Detailed steps for exchanging a Radio Master based on module type.

Profibus-Slave-Address Management

Increasing System Availability

Setting the Filter Time

Tips and Tricks for Optimal Performance

Improving EMC Safety

Optimized Antenna Installation

Troubleshooting Advices

Practical steps and checks for diagnosing and resolving common system issues.

Technical Specifications