Need help?Do you have a question about the Schiller Grounds Care Bob-Cat CLASSIC PRO 932007G and is the answer not in the manual?
General| Drive System | Hydrostatic |
|---|---|
| Engine Type | 4-cycle |
| Mulching Capability | Yes |
| Bagging Capability | Optional |
| Side Discharge Capability | Yes |
| Engine Brand | Kawasaki |
| Cutting Width | 61 inches |
| Cutting Height | 1.5 - 5 inches |
| Deck Material | Steel |
| Wheel Size (Rear) | 24 x 12 inches |
| Warranty | 3 years |
| Cutting Height Adjustment | Foot |
Explains DANGER, WARNING, and CAUTION signal words and symbols.
Instructions for unpacking, connecting handles, and basic assembly.
Setting up throttle, choke, fuel lines, and brake adjustments.
Steps for checking, changing engine oil, and filter replacement.
Guidelines for oil and filter changes after the initial break-in period.
Cleaning and oiling the air cleaner elements for optimal engine function.
Procedures for checking gearbox lubrication and replacing the fuel filter.
Inspecting spark plugs and procedures for blade sharpening and replacement.
A chart detailing maintenance tasks based on operating hours.
Adjusting the operator presence control levers for proper switch engagement.
Adjusting traction rods and brake linkage for optimal control.
Modifying drive belt tension according to mowing conditions.
Steps for replacing the PTO belt on 32", 36", and 48" cutterdecks.
Procedures for replacing the gearbox and wheel drive belts.
Exploded view and parts list for the engine deck assembly.
Exploded view and parts list for the 32" transmission drive.
Exploded view and parts list for the 36" and 48" transmission drive.
Detailed parts and diagram for the upper handle assembly.
Exploded view and parts list for the Peerless transmission.
Exploded view and parts list for the 32" cutter deck assembly.
Exploded view and parts list for the 36" cutter deck assembly.
Exploded view and parts list for the 48" cutter deck assembly.
Exploded view and parts list for the caster assembly.
Diagram illustrating the electrical connections and components of the machine.
List of various labels and decals applied to the machine for information.
Parts list and diagram for cutterdeck frame and weight components.
To Next Page
