To Next PageTo Next Page
Need help?Do you have a question about the Schiller Grounds Care BOB-CAT XRZ PRO RS FX651V KAW and is the answer not in the manual?
General| Engine | FX651V KAW |
|---|---|
| Cutting Width | 52 inches |
| Transmission | Hydro-Gear ZT-2800 |
| Fuel Capacity | 5.2 gal |
| Weight | 820 lb |
| Fuel Type | Gasoline |
| Deck Type | Fabricated |
| Deck Material | Steel |
Lists Bob-Cat Mowers XRZ PRO RS models covered by this manual.
Provides warnings regarding cancer, reproductive harm, and engine exhaust.
Covers notices, signal words, and hazard definitions for safe operation.
Details operator preparation, training, and site assessment for safe use.
Covers machine checks, safe fueling practices, and handling gasoline.
Instructions for safe operation, including starting, stopping, and children safety.
Guidelines and warnings for operating the mower on sloped terrain.
Safety precautions for loading, transporting, and towing equipment.
General safety guidelines for performing maintenance tasks.
Safety precautions when handling mower blades and batteries.
Recommendations for safely storing the machine and fuel.
Lists required tools and steps for uncrating the unit.
Instructions for setting tire pressure and adjusting traction levers.
Details final checks including oil levels and battery connections.
Illustrations and descriptions of various safety and identification labels.
Explanation of the keyswitch, throttle lever, choke, and PTO switch functions.
Details on the hour meter and foot-operated controls like lift and power outlet.
Operation of traction levers for driving, steering, and braking.
Instructions for engaging the parking brake and pushing the machine.
List of checks the operator must perform before operating the unit.
Guides on fueling the mower and starting the engine.
Instructions for driving the machine, including turns and stopping.
Guidance on cutting grass effectively and tips for optimal results.
A chart detailing maintenance operations and their intervals.
A logbook section for recording maintenance performed.
Daily inspection points and procedures for battery maintenance.
Identifies points requiring lubrication and their intervals.
Procedures for checking and changing engine oil and filters.
Maintenance for the air cleaner and engine cooling system.
Instructions for transaxle fluid changes and purging.
Procedures for blade removal, balance, sharpening, and installation.
Steps to adjust deck leveling and set the desired height of cut.
Procedures for adjusting the parking brake and hydrostatic system.
Instructions for replacing the cutterdeck belt and adjusting tension.
Procedures for replacing the transaxle drive belt and adjusting the seat.
Exploded view and parts list for the frame and engine mounting.
Exploded view and parts list for the transaxle system.
Parts breakdown for the bumper, fuel tanks, and control panel.
Components related to the fuel system and tank covers.
Parts list and diagram for the deck lifting mechanism.
Components for the front caster wheel assembly.
Parts for the kickplate, seat mounting, and associated components.
Parts breakdown for the steering system.
Components related to the parking brake mechanism.
Diagram and parts list for the electrical wire harness.
Parts lists and diagrams for various side discharge deck sizes.
Components for the mower deck chute, baffles, and related parts.
List of decals and their locations on the power unit.
Parts and assembly details for the ROPS.
