Schlage L9485 Installation Instructions

*P516-909*
P516-909
Indicator trim is available for either
the inside or outside of the door
on allowable functions.
Non-indicator trim is furnished on
the opposite side of the door.
Conrm desired placement
(inside or outside) before
installation.
The L9000 lock with
indicator is not intended for
exterior door applications.
For retrot, see page 9.
Check the door preparation
dimensions with the template
included in the package.
Inside cylinder with
indicator x outside cylinder
with non-indicator shown
OR
OR
Tools for installation:
Not included:Included:
Cylinder
Indicator
options:
Coin turn Thumb turnPrivacy
Non-indicator
options:
Thumb
turn
CylinderCoin turn Privacy
L9000/LV9000 Series Lock with Indicator Sectional Trim Installation Instructions
1 IMPORTANT! Check lock handing before installation.
To change handing:
A. Pull out the latch
and rotate 180°.
B. Remove the lock
handing screw
from one side of
the chassis and
install it on the
opposite side.
The lock handing
screw should
always be on the
interior side of the
door.
L-Series
Actual size
A
B
B\nv"
LV-Series
Actual size
A
B
2 Install lock chassis.
DO NOT FULLY
TIGHTEN CHASSIS
MOUNTING SCREWS
L9000/LV9000
Lock with Indicator

Schlage L9485 Specifications

General

Type	Deadbolt
Brand	Schlage
Model	L9485
Series	L Series
Function	Single Cylinder
Finish	Satin Nickel
Door Thickness	1-3/8" to 1-3/4"
Material	Metal
Handing	Non-Handed
Latch Type	Deadlatch
Strike Plate Included	Yes
Mounting Hardware Included	Yes
ANSI Grade	Grade 1
Keying	Keyed Different
Backset	2-3/4"