Schlage LINK WCE100 User Manual

Camera User Guide
There are two cameras available for use with the Schlage
LiNK system.
WCW100
The WCW100 is a wireless camera that communicates
with the Schlage LiNK system through your existing
wireless router.
WCE100
The WCE100 is a wired camera that communicates with
the Schlage LiNK system through your existing router.
POWER
NETWORK
WCW100 Wireless Camera
POWER
NETWORK
WCE100 Wired Camera
DO NOT connect Ethernet or power before
enrolling the camera.
For indoor use ONLY!
!
Plastic
Nut
Plastic
Washer
Threaded
Post
Attaching the Camera to the Stand
Attaching the Antenna
Wireless Antenna (WCW100 Only)
Rotate the wireless antenna onto the threaded post to ensure clear wireless
communication. Antenna can be adjusted to obtain a better signal. Best results
are usually obtained by positioning the antenna vertically.
Camera Stand
Install the camera stand to provide a steady base for the camera.
1. Loosen the plastic nut on the back of the camera.
2. Rotate the threaded post upwards.
3. Rotate the camera onto the threaded post until it stops.
4. Tighten plastic washer against camera to secure.

Schlage LINK WCE100 Specifications

General

Motion Detection	Yes
Wireless	Yes
Night Vision	Yes
Storage	Cloud storage (subscription required)
Connectivity	Wi-Fi
Power Source	AC adapter

Summary

Camera Models and Physical Setup

WCW100 Wireless Camera

Details the Schlage WCW100 wireless camera for the LiNK system.

WCE100 Wired Camera

Details the Schlage WCE100 wired camera for the LiNK system.

Wireless Antenna Setup

Instructions for attaching and positioning the wireless antenna for optimal signal.

Camera Stand Setup

Guide to assembling the camera stand for a stable base.

Camera Components and Buttons

Power, Ethernet, and MAC ID

Details power connection, Ethernet port, and MAC ID location for camera setup.

Privacy Button Functionality

Explains how to enable/disable video transmission using the privacy button.

WPS and Reset Button Usage

Advises against WPS button use and explains recommended reset button procedure.

Camera Configuration and Management

Enrolling the Camera

Steps for registering the camera with the Schlage LiNK system via the web.

Modifying Camera Settings

Guide to adjusting camera settings, including wireless configuration.

Rebooting and Moving Cameras

Procedures for rebooting the camera and transferring it between LiNK accounts.

LED Indicator Guide

Description of LED behaviors for power and network status.

Troubleshooting and FAQs

Connectivity and Setup Issues

Addresses issues with SSID entry, router connection, and initial setup problems.

Camera Performance Problems

Troubleshooting steps for when the camera stops working or video is not displayed.

Mobile Viewing and Video Playback

Resolves problems with viewing camera feed on mobile devices and video playback limits.

Additional FAQ Topics

Covers mounting, compatibility, account limits, and video security.