Schlage LINK WCW100 User Manual

Camera User Guide
There are two cameras available for use with Schlage
LiNK.
WCW100
The WCW100 is a wireless camera that communicates
with the LiNK system through your existing wireless
router.
WCE100
The WCE100 is a wired camera that communicates with
the LiNK system through your existing router.
POWER
NETWORK
WCW100 Wireless Camera
POWER
NETWORK
WCE100 Wired Camera
DO NOT connect Ethernet or power before
enrolling the camera.
For indoor use ONLY!
!
Plastic
Nut
Plastic
Washer
Threaded
Post
Attaching the Camera to the Stand
Attaching the Antenna
Wireless Antenna (WCW100 Only)
Rotate the wireless antenna onto the threaded post to ensure clear wireless
communication. Antenna can be adjusted to obtain a better signal. Best results
are usually obtained by positioning the antenna vertically.
Camera Stand
Install the camera stand to provide a steady base for the camera.
Loosen the plastic nut on the back of the camera.1.
Rotate the threaded post upwards.2.
Rotate the camera onto the threaded post until it stops.3.
Tighten plastic washer against camera to secure.4.

Schlage LINK WCW100 Specifications

General

Brand	Schlage
Model	LINK WCW100
Category	Security Camera
Language	English

Summary

Camera Overview and Setup

Camera Models and Features

Introduces the WCW100 wireless and WCE100 wired cameras for Schlage LINK.

Wireless Antenna Attachment

Instructions for attaching and positioning the wireless antenna for optimal signal.

Camera Stand Installation

Steps to install the camera stand for a stable base.

Camera Hardware and Controls

Power and Ethernet Connection

Guidance on connecting power and Ethernet, and locating the MAC ID.

Privacy Button Functionality

Explains how to use the privacy button to suspend video transmission.

Button Usage Warnings

Alerts users to avoid using the WPS and Reset buttons during enrollment.

Camera Management and Indicators

Camera Enrollment Process

Details the steps for enrolling the camera using the SchlageLINK website.

Modifying Camera Settings

Instructions for logging in and editing camera settings, including wireless configuration.

Camera Reboot Procedure

Steps to unplug and reconnect power and Ethernet to reboot the camera.

Moving Camera Between Accounts

Describes how to remove a camera from one account and add it to another.

LED Status Indicators

Explains the meaning of different LED colors and blinking patterns for power and network.

Troubleshooting and FAQ

Connectivity and Configuration Issues

Addresses SSID problems, router access, and password recovery.

Camera Operational Problems

Covers issues like cameras stopping working, no video on phone, or viewer text display.

Common User Questions

Answers about video storage, pan/tilt/zoom, outdoor use, multiple cameras, security, and third-party cameras.