Pilot Briefing Schleicher ASK-21 N421G
Updated September 2, 2016
File: ASK-21 Notes Burtt Compton GBSC 2016-09-02.doc Page: 10 of 10
BECKER AR 6201 RADIO
Quick Reference Data
1. Turn on sailplane electric first.
2. Turn on the radio by the volume knob.
3. Press Squelch button to check speaker volume for back seat pilot.
4. Press Mode button to find mode for voltage check for batteries 1 & 2.
5. Press Mode button to go to the “flip-flop” frequencies and pre-set.
6. The “arrow” button switches the “flip-flop” frequencies.
7. Always keep the radio on while on the taxiway or runway to monitor traffic.
Low Voltage Warning: If the supply voltage drops below 10.5 volts, the LCD will flash.
In Mode 3, the supply voltage is displayed in the bottom line of the LCD.
Lxnav S-3 Electric / Audio Variometer
The Vario will have a standard club configuration that should suit all
instructional, intro, and other club flights. This configuration should not be
changed.
NOTE: If you feel the need to change the configuration for your flight, YOU are
responsible for reconfiguring the instrument back to the standard club settings.
Quick setup/use notes to follow gjy 9/2/16
Burt Compton, Modified for GBSC by G. Young Rev 2016-09-02
To Previous Page
Loading...
