schmersal AZM40Z-ST-1P2P

To Next Page

ÇALIŞTIRMA VE MONTAJ TALIMATLARI

Solenoid interlock AZM40Z-ST-1P2P (Test)

Table of Contents

1 About this document

1.1 Function

1.2 Target group of the operating instructions: authorised qualified personnel

1.3 Explanation of the symbols used

1.4 Appropriate use

1.5 General safety instructions

1.6 Warning about misuse

1.7 Exclusion of liability

2 Product description

2.1 Ordering code

2.2 Special versions

2.3 Purpose

2.4 Technical Data

3 Mounting

3.1 General mounting instructions

3.2 Manual release

3.3 Dimensions

4 Electrical connection

4.1 General information for electrical connection

4.2 Requirements for the connected safety-monitoring module

4.3 Wiring configuration and connector accessories

4.4 Wiring examples

5 Actuator teaching / actuator detection

6 Active principle and diagnostic functions

6.1 Magnet control

6.2 Mode of operation of the safety outputs

6.3 Diagnostic-LEDs

6.4 Diagnostic outputs

6.5 Diagnostic information

7 Set-up and maintenance

7.1 Functional testing

7.2 Maintenance

8 Disassembly and disposal

8.1 Disassembly

8.2 Disposal

1 About this document

1.1 Function

1-28

Main Page

Need help?

Do you have a question about the schmersal AZM40Z-ST-1P2P and is the answer not in the manual?

Summary

Product Description

Ordering Code

Details the structure and components of the product's ordering code.

Special Versions

Describes specifications for special versions not covered by the standard ordering code.

Purpose

Explains the intended application and design of the safety switchgear.

Technical Data

Lists the technical specifications, performance data, and certifications of the product.

Mounting

General Mounting Instructions

Provides general guidelines and precautions for installing the solenoid interlock.

Manual Release

Explains the procedure and operation of the manual release mechanism.

Dimensions

Presents the physical dimensions and measurements of the product.

Electrical Connection

General Information for Electrical Connection

Outlines essential information and safety requirements for electrical connections.

Requirements for the Connected Safety-Monitoring Module

Specifies prerequisites for connecting electronic safety-monitoring modules.

Wiring Configuration and Connector Accessories

Details wiring diagrams, pin assignments, and available connector accessories.

Wiring Examples

Illustrates sample wiring configurations for different applications.

Actuator Teaching; Actuator Detection

Active Principle and Diagnostic Functions

Magnet Control

Explains the magnet control mechanism and its function for the interlock.

Mode of Operation of the Safety Outputs

Describes how the safety outputs behave during operation and in fault conditions.

Diagnostic-LEDs

Details the meaning of the diagnostic LEDs and their colour codes for status indication.

Set-up and Maintenance

Functional Testing

Outlines the necessary steps for testing the safety function of the components.

Maintenance

Describes the recommended visual inspections and maintenance procedures.

Disassembly and Disposal

Disassembly

Provides instructions for safely disassembling the safety switchgear.

Disposal

Specifies the correct procedures for disposing of the safety switchgear.