schmersal AZM 170 - User Manual

AZM 170
Operating instructions
Solenoid interlock
EN
1
1. About this document
1.1 Function
This operating instructions manual provides all the information you
need for the mounting, set-up and commissioning to ensure the safe
operation and disassembly of the safety switchgear. The operating
instructions must be available in a legible condition and a complete
version in the vicinity of the device.
1.2 Target group: authorised qualified personnel
All operations described in this operating instructions manual must
be carried out by trained specialist personnel, authorised by the plant
operator only.
Please make sure that you have read and understood these operating
instructions and that you know all applicable legislations regarding
occupational safety and accident prevention prior to installation and
putting the component into operation.
The machine builder must carefully select the harmonised standards
to be complied with as well as other technical specifications for the
selection, mounting and integration of the components.
1.3 Explanation of the symbols used
Information, hint, note:
This symbol is used for identifying useful additional information.
Caution: Failure to comply with this warning notice could
lead to failures or malfunctions.
Warning: Failure to comply with this warning notice could
lead to physical injury and/or damage to the machine.
1.4 Appropriate use
The products described in these operating instructions are developed
to execute safety-related functions as part of an entire plant or machine.
It is the responsibility of the manufacturer of a machine or plant to
ensure the correct functionality of the entire machine or plant.
The safety switchgear must be exclusively used in accordance with
the versions listed below or for the applications authorised by the
manufacturer. Detailed information regarding the range of applications
can be found in the chapter "Product description".
1.5 General safety instructions
The user must observe the safety instructions in this operating
instructions manual, the country specific installation standards as well
as all prevailing safety regulations and accident prevention rules.
Further technical information can be found in the Schmersal
catalogues or in the online catalogue on the Internet:
www.schmersal.net.
The information contained in this operating instructions manual is
provided without liability and is subject to technical modifications.
There are no residual risks, provided that the safety instructions as well
as the instructions regarding mounting, commissioning, operation and
maintenance are observed.
1.6 Warning about misuse
In case of improper use or manipulation of the safety
switchgear, personal hazards or damages to machinery
or plant components cannot be excluded. The relevant
requirements of the standard ISO 14119 must be observed.
Content
1 About this document
1.1 Function ..............................................1
1.2 Target group: authorised qualied personnel..................1
1.3 Explanation of the symbols used ...........................1
1.4 Appropriate use ........................................1
1.5 General safety instructions ...............................1
1.6 Warning about misuse ...................................1
1.7 Exclusion of liability .....................................2
2 Product description
2.1 Ordering code .........................................2
2.2 Special versions........................................2
2.3 Purpose ..............................................2
2.4 Technical data .........................................2
2.5 Safety classication of the interlocking function................3
2.6 Safety classication of the guard locking function ..............3
3 Mounting
3.1 General mounting instructions .............................4
3.2 Dimensions ...........................................4
4 Electrical connection
4.1 General information for electrical connection..................4
4.2 Contact variants........................................5
5 Set-up and maintenance
5.1 Functional testing.......................................5
5.2 Maintenance ..........................................5
6 Disassembly and disposal
6.1 Disassembly...........................................5
6.2 Disposal ..............................................5
7 EU declaration of conformity
x.000 / 05.2019 / v.A. - 101122371-EN / T / 2019-05-08 / AE-Nr. 10939
EN
Operating instructions. . . . . . . . . . . . .pages 1 to 6
Original

Summary

About this document

Function

Explains the purpose and function of the safety switchgear and the operating instructions.

Target Group: Authorised Qualified Personnel

Defines the intended audience and expertise required for handling the safety switchgear.

Explanation of Symbols

Details the meaning of symbols used in the manual for warnings and additional information.

Appropriate Use

Outlines the intended application of the safety-related functions within a plant or machine.

General Safety Instructions

Provides essential safety guidelines and precautions for operating the safety switchgear.

Warning About Misuse

Warns about potential hazards and damages resulting from improper handling or manipulation.

Exclusion of Liability

States limitations of liability for damages caused by incorrect installation or use.

Product Description

Ordering Code

Details the various options and codes available for configuring the solenoid interlock.

Special Versions

Describes specific product variations and their corresponding specifications.

Purpose

Explains the intended function of the solenoid interlock in preventing hazardous conditions.

Technical Data

Provides detailed technical specifications, ratings, materials, and standards for the device.

Safety Classification of Interlocking Function

Classifies the interlocking function according to ISO 13849-1 standards.

Safety Classification of Guard Locking Function

Classifies the guard locking function based on power isolation principles.

Mounting

General Mounting Instructions

Details the general procedures, precautions, and standards for installing the solenoid interlock.

Dimensions

Provides detailed dimensional drawings and measurements for the solenoid interlock and actuator.

Electrical Connection

General Information for Electrical Connection

Covers guidelines and safety precautions for connecting the device electrically.

Contact Variants

Illustrates different contact configurations (NO/NC) for power to unlock and power to lock.

Set-up and Maintenance

Functional Testing

Describes how to perform functional tests to ensure the safety function of components.

Maintenance

Outlines recommended procedures for regular visual inspection and functional checks.

Disassembly and Disposal

Disassembly

Explains the procedure for safely dismantling the safety switchgear in a de-energised state.

Disposal

Provides guidance on the proper and appropriate disposal of the safety switchgear.

EU Declaration of Conformity

schmersal AZM 170 Specifications

General

Brand	schmersal
Model	AZM 170
Category	Industrial Equipment
Language	English