SCHUBERTH C3 PRO - The Helmet; Standard Compliance; ECE Approval and Certification

EN
1. STANDARD
The C3 PRO conforms to the ECE-R 22.05 standard. This testing norm
guarantees conformity to dened safety standards in respect of impact
absorption, visor, retention system and eld of vision. The certication
applies to all the countries of the European Union and all countries that
recognise the ECE standard. It also guarantees conformity with all insurance
requirements that are important in the event of a claim.
Please note that this C3 PRO with ECE approval is not certied for the USA,
Canada or any other EU countries. It is only permitted for use in countries
where the ECE standard is valid.
Note:
The only SCHUBERTH helmets that it is legal to use in the USA,
Canada or other non-EU countries are those with the appropriate
approval and technical specications.
Further information and details of sales outlets for these helmets
can be found on the internet.
2. ECEAPPROVAL
ECE test standard
Certication number
Certifying authority
Serial number
051234/P-1234
05123456
C. THE HELMET
3. ANATOMY OF THE HELMET
4. OUTER SHELL
The outer shell of the C3 PRO helmet combines an aerodynamically
optimal shape with consistent protection. It consists of a special glass-bre
reinforced duroplastic matrix developed by SCHUBERTH, which gives the
helmet the high level of strength needed for your protection.
Caution:
The safety helmet is designed to absorb the eects of only one impact.
The helmet must be replaced after a fall, accident or any other impact.
5. INNER SHELL
For optimised impact absorption properties, the inner shell of the helmet
consists of several components. The complex multi-segment foam padding
of the main body provides better absorption and dissipation of impact forces
and gives you the highest level of safety. The large side panels ensure the
helmet sits optimally and comfortably.
Integrated antennas
Face shield
Reective panels
Sun visor
Inner lining
Head ventilation
Face shield/
chin ventilation
Chin bar release
Head ventilation
Inner shell
Anti-fog lens
Visor mechanics
Outer shell
Retention system
(with anti-roll-o system)
Operating slide for
sun visor
Chinstrap buckle