EasyManuals Logo

SCHUBERTH SRC-System PRO User Manual

SCHUBERTH SRC-System PRO
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
english
10 11
Two-way intercom pairing
1. Switch on both units.
2. Press the intercom button for at least 5 seconds, until the
red LED begins flashing quickly, indicating intercom pairing
mode.
3. Enter intercom pairing mode on the second unit according
to the device‘s instructions.
Operating the radio
Turn on the
radio
In standby mode, double-tap the music
button.
Turn off the
radio
While listening to the radio, press the
music button for 2 seconds.
Switch to
next preset
FM station
While listening to the radio, tap music
button to cycle through the six preset FM
stations.
RDS on/off
(default: off)
While the radio is on, press volume up and
volume down simultaneously for 2 seconds.
How to reset to factory settings
Caution: If you get a system error, we suggest that you reset the
system to its factory settings. (This process deletes all paired devices:
Mobile / GPS and Riders)
1. With the SRC-System™ turned on, press the volume up button for at
least 5 seconds. The red and blue LEDs will begin flashing quickly.
2. Press music/mobile button for 2 seconds.
3. The LEDs will flash five times and the SRC-System™ will turn itself off.
Manufacturer
SCHUBERTH GmbH
Stegelitzer Str. 12
39126 Magdeburg
Germany
phone: +49 (0) 391 8106-0
fax: +49 (0) 391 8106-180
e-mail: info@schuberth.de
www.schuberth.com
Subject to technical changes.
We do not accept liability for mistakes and printing errors.

Other manuals for SCHUBERTH SRC-System PRO

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SCHUBERTH SRC-System PRO and is the answer not in the manual?

SCHUBERTH SRC-System PRO Specifications

General IconGeneral
BrandSCHUBERTH
ModelSRC-System PRO
CategoryTwo-Way Radio
LanguageEnglish

Related product manuals