Schüco de
Commissioning instructions – Schüco DCS Touch Display 23
Dok-Nr.10000432116_01
7. DCS Touch Display
The door communication and access control are supplied in this module which is operated via a
touch interface. Door communication takes place via the open and unmodied SIP standard in
accordance with RFC 3261. Between one and an almost unlimited number of users can be connected
to the system.
There is the option to display pictures of the users or company logos next to the names on the screen.
The access control is code-based. Via a simple user management system, access codes can be
activated depending on times of the day and days of the week.
The digit buttons in the „code entry“ view can be displayed in a mixed, random order for increased
security. It is therefore no longer possible to reproduce the codes from ngerprint impressions.
Settings for door communication and access control are made via a clearly laid-out web interface.
Basic settings, such as the brightness of the screen, can be carried out directly on the
DCS Touch Display. The DCS Touch Display is equipped with inputs and outputs to which, for exam-
ple, an electric strike for internal doors can be connected.
Data is communicated and power is supplied via a shared network cable.
To Next Page
Loading...