Schücode Commissioning instructions – Schüco DCS Touch Display
34
Dok-Nr.10000432116_01
8.2.2. Ending a call
Tap the „Mouth“ symbol in the bottom part of the screen to end the call. As soon as the call is ended
by you or the person at the counterpart intercom station, the DCS Touch Display shows the
„Doorbell list“ once again.
8.3. Entering the access code
Swipe to the left from the „Doorbell list“ view to display the „Code entry“ view. From here it is possible
to access the „Conguration“ view or trigger another, previously dened event (e.g. actuate a door
opener or deactivate an alarm system).
Besides the digits „0“ to „9“ for the access code, there are three further buttons:
Switch to the „Doorbell list“ view (alternatively you can swipe to the right).
Delete the last digit entered (if a digit has been entered, this button appears instead of the
button described above).
Conrm access code.
To Next Page
Loading...
