EasyManua.ls Logo

Schumacher Electric SL1316 - User Manual

Schumacher Electric SL1316
23 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
0099001830-00
PLEASE SAVE THIS OWNER’S MANUAL AND READ BEFORE EACH USE.
This manual will explain how to use the unit safely and effectively. Please read
and follow these instructions and precautions carefully.
POR FAVOR GUARDE ESTE MANUAL DEL PROPIETARIO Y LEER ANTES DE
CADA USO. En este manual se explica cómo utilizar la unidad segura y efectiva.
Por favor, lea y siga las siguientes instrucciones y precauciones.
MODEL / MODELO:
SL1316
Lithium Ion Jump Starter, Fuel Pack
and Backup Power
Litio Ion Jump Starter, pack de energía
y energía de reserva
OWNERS MANUAL
MANUAL DEL USUARIO

Table of Contents

Questions and Answers

  • R
    Ryan BanksAug 17, 2025
    What to do if my Schumacher Electric SL1316 Remote Starter is beeping and shows 'BATTERY LOW- RECHARGE'?
    • E
      Emily TorresAug 17, 2025
      If your Schumacher Electric Remote Starter beeps and displays 'BATTERY LOW- RECHARGE', it means the internal battery was discharged either by using the 12V/USB function or during jump starting. If you don't recharge the battery, the 12V/USB function will automatically shut off after 10 minutes. Therefore, you should recharge the internal battery as soon as possible.
  • R
    Randall ConleyAug 20, 2025
    Why won't my Schumacher Electric SL1316 Remote Starter power my 12V or USB device?
    • C
      Carolyn McdonaldAug 21, 2025
      If your Schumacher Electric Remote Starter isn't powering your 12V or USB device, it could be due to the device not being turned on, or the internal battery of the unit not being charged. To fix this, first ensure that the device is switched on. If it still doesn't work, check the battery charge status of the remote starter and recharge it if necessary.
  • J
    Jessica EvansAug 25, 2025
    How to stop the alarm on my Schumacher Electric Remote Starter when it shows 'WARNING-CLAMPS REVERSED'?
    • H
      hgonzalesAug 25, 2025
      If your Schumacher Electric Remote Starter's alarm is sounding and the display shows 'WARNING-CLAMPS REVERSED', it means the connections are reversed. To resolve this, disconnect the unit and reverse the clamps.
  • C
    Christopher RiceAug 27, 2025
    What to do if my Schumacher Electric Remote Starter displays 'BATTERY TOO HOT TO CHARGE'?
    • R
      Rodney MitchellAug 27, 2025
      If your Schumacher Electric Remote Starter displays 'BATTERY TOO HOT TO CHARGE' or 'BATTERY TOO HOT' during jump starting, it indicates that the internal temperature is too high, preventing recharging or jump starting to avoid damage. Disconnect the unit and move it to a cooler, well-ventilated area to cool down before attempting to recharge or jump start again.
  • A
    Ashley WilsonAug 31, 2025
    What does 'JUMP START READY-BATTERY COLD REDUCED PERFORMANCE' mean on my Schumacher Electric Remote Starter?
    • G
      Gail WhiteAug 31, 2025
      When your Schumacher Electric Remote Starter displays 'JUMP START READY-BATTERY COLD REDUCED PERFORMANCE', it means the internal battery's temperature is too low. To warm it up, turn on the headlights or try jump starting a few times.
  • M
    Maxwell RogersSep 4, 2025
    Why does my Schumacher Electric Remote Starter display 'BATTERY TOO COLD TO CHARGE' when recharging?
    • C
      cmcdanielSep 4, 2025
      If your Schumacher Electric Remote Starter displays 'BATTERY TOO COLD TO CHARGE' during recharging, it means the internal battery's temperature is too low. To fix this, disconnect the unit and move it to a warmer, well-ventilated location, allowing it to warm up before attempting to recharge.
  • W
    wramseySep 8, 2025
    What to do if the green LED is flashing and the display shows 'CHARGE ABORTED-SEE MANUAL' on my Schumacher Electric SL1316?
    • B
      briannacolemanSep 8, 2025
      If the green LED is flashing and the display shows 'CHARGE ABORTED-SEE MANUAL' on your Schumacher Electric Remote Starter, it indicates that charging has been aborted because the battery isn't accepting a charge. Try resetting the charger by briefly unplugging the unit.
  • J
    Jessica HernandezNov 12, 2025
    Why won't my Schumacher Electric SL1316 jump start my car?
    • J
      Jennifer McdonaldNov 12, 2025
      Your Schumacher Electric Remote Starter might fail to jump start your car due to several reasons: the clamps aren't making a solid connection, the internal battery isn't charged, the internal battery's temperature is too high (above 131°F or 55°C), the vehicle's battery voltage is too high (over 15V) or too low (below 1V), the outside temperature is too low (less than 14°F or -10°C), or the vehicle's battery is defective. To resolve this: * Ensure clean and secure clamp connections. * Check and recharge the battery if needed. * Cool the unit in a ventilated area if it's too hot. * Note that this jump starter is not suitable for vehicles with battery voltage over 15V. * Press and hold the jump start button for 5 seconds until the display shows 'JUMP START READY'. * If it doesn'...

Summary

Important Safety Instructions

Risk of Explosive Gases

General warning about explosive gases from batteries.

Risk of Electric Shock or Fire

Warnings about electrical hazards like shock or fire.

Personal Precautions

Spark Prevention Near Batteries

Precautions to prevent sparks near batteries to avoid explosion.

Personal Safety Measures

Specific safety measures for personal protection when working with batteries.

Lithium Ion Battery Safety

Information regarding the lithium ion battery and its fire extinguishing properties.

California Proposition 65 Warning

California Proposition 65 warning about chemicals in the product.

Preparing to Use the Unit

Battery Acid Contact Warning

Warning about contact with corrosive battery acid.

Unit Preparation Steps

Steps to prepare the unit and environment before use.

Connecting to a Battery

Spark Hazard During Connection

Critical warning about sparks and battery explosions during connection.

Battery Connection Procedure

Step-by-step guide for connecting the jump starter clamps to a vehicle battery.

Features

Product Features Overview

Overview of the various components and capabilities of the jump starter.

Control Panel

Digital Display Functionality

Explanation of the digital display functions and indicators.

LED Indicator Status

Description of the LED indicators for charging status.

Control Panel Buttons

Explanation of the functions of the control panel buttons.

Charging the Internal Battery

Importance of Charging

Importance of charging the internal battery for longevity and readiness.

Charging Guidelines and Procedures

Guidelines and procedures for charging the jump starter's internal battery.

Charging via AC Wall Charger

Instructions for charging the unit using the AC wall charger.

Charging While Driving

Instructions for charging the unit using the 12V DC car charger.

Operating Instructions

Jump Starting a Vehicle Engine

Step-by-step guide to jump-starting a vehicle engine.

Starting Batteries with Low Voltage

Procedure for jump-starting vehicles with very low battery voltage.

Powering 12 V DC Devices

How to use the unit to power 12V DC accessories.

Using the USB Port

Instructions for using the USB port to charge devices.

Using the LED Light

How to operate the built-in LED light.

Using a Memory Saver

Information on using the unit with a memory saver for vehicle diagnostics.

Display Messages

Recharge Messages

Explains messages displayed during the charging process.

12 V;USB Usage Messages

Explains messages related to 12V/USB port usage.

Jump Starter Usage Messages

Explains messages shown when using the jump starter function.

Other Unit Messages

Explains additional status messages and warnings displayed by the unit.

Maintenance Instructions

Maintenance Procedures

Instructions for performing regular maintenance on the unit.

Storage Instructions

Storage Guidelines

Guidelines for storing the jump starter to ensure its longevity.

Troubleshooting

Battery Too Hot

Troubleshooting steps for when the unit indicates it is too hot.

Battery Too Cold

Troubleshooting steps for when the unit indicates it is too cold.

Reversed Clamp Warning

Troubleshooting for reversed clamp connections causing alarms.

Unit Fails to Jump Start

Solutions for when the jump starter fails to start the car.

Device Power Issues

Solutions for when 12V or USB devices are not powered.

Cold Performance Reduction

Troubleshooting for reduced performance due to cold internal battery.

Low Battery Recharge Warning

Troubleshooting for low battery warnings and beeping sounds.

Charging Aborted Error

Troubleshooting for charging failures or aborted charges.

Before Returning for Repairs

Contacting Customer Service

Information on how to contact customer service for troubleshooting or repairs.

Specifications

Technical Specifications

Detailed technical specifications of the jump starter and its components.

Replacement Parts

Available Replacement Parts

List of available replacement parts for the unit.

Limited Warranty

Warranty Terms and Conditions

Details of the limited warranty provided for the product.

Warranty Card; Tarjeta de Garantía

Warranty Registration Instructions

Instructions for registering the product warranty online or by mail.

Schumacher Electric SL1316 Specifications

General IconGeneral
ModelSL1316
Voltage12V
USB PortsYes
CompatibilityGas engines up to 6.0L and diesel engines up to 3.0L
FeaturesLED light

Related product manuals