To Next Page
B
bcookAug 11, 2025
What to do if my Schwamborn DSM 450 shuts down automatically?
- RRichard MooreAug 11, 2025
If your Schwamborn Floor Machine shuts down automatically and an error code appears on the power display, it could be due to several reasons. First, the machine might be overloaded, triggering the drive overload protection. If your machine has speed control, try reducing the speed. You may also need to select different tools. To reset the machine, hold it by the guide handle and press the RESET button. If it doesn't start, disconnect the power plug and contact the manufacturer. Another cause might be using a connecting cable (extension cable) that is too long; ensure you observe the correct minimum cross-section and maximum length. Lastly, check for a faulty mains connection by inspecting the connecting and extension cables, replacing them if necessary, and trying a different power socket.
General
