To Next PageTo Next PageWhat to do if my Schwamborn ES 420 shuts down automatically?
If your Schwamborn Floor Machine shuts down automatically, it might be overloaded, triggering the drive overload protection. You should: 1. Wait 2-3 minutes. 2. Restart the machine. If it repeatedly trips, reduce the load by using different tools. Alternatively, the connecting cable's cross-section may be too small, so inspect and replace the connecting or extension cable if needed.
How to fix a Schwamborn ES 420 that will not start?
If your Schwamborn Floor Machine won't start, the issue might be with the power supply. First, ensure the connecting cable (extension cable) is properly connected to a working power socket. If that doesn't work, the connecting cable may be defective and need replacement. Also, try using a different power socket. Finally, a safety switch could be defective and require replacement.
Why is the grinding pattern uneven with my Schwamborn Floor Machine?
An uneven grinding pattern with your Schwamborn Floor Machine can be due to loose, damaged, or worn tools. Make sure to fasten any loose tools. If the issue persists, replace any damaged or worn tools.
Information on obtaining customer service, accessories, and spare parts.
Details regarding manufacturer liability and warranty exclusions.
Explanation of symbols used throughout the manual for warnings and information.
Guidelines and regulations for accident prevention and safety compliance.
Critical safety instructions for operating the machine safely.
Steps required to prepare the machine before starting operation.
Instructions for attaching the optional water tank to the machine.
Instructions for attaching the optional vacuum unit.
Instructions for attaching the optional shampooing device.
General instructions and warnings for machine operation.
Guidance on how to direct the machine's movement during operation.
Procedures for safely ending the machine's operation.
Procedure for tilting the machine for maintenance or transport.
Instructions for mounting various tools and accessories onto the machine.
Instructions for removing tools and accessories from the machine.
Steps for accepting the machine upon delivery and checking for completeness.
Safety guidelines and procedures for transporting the machine.
General| Brand | Schwamborn |
|---|---|
| Model | ES 420 |
| Category | Floor Machine |
| Language | English |
