Schwamborn ES 51S - User Manual

Questions and Answers

T
travisrobertsAug 9, 2025
What to do if my Schwamborn Floor Machine shuts down independently?
- S
  Stephen GrayAug 9, 2025
  If your Schwamborn Floor Machine shuts down independently, it may be due to the machine being overloaded and the drive overload protection being triggered, or the connecting cable’s cross-section being too small. To resolve this: * Reset the machine by waiting 30 seconds and then restarting it. * Check the connecting cable and replace it if necessary. If the drive overload protection trips repeatedly, allow the machine to wind down by mounting other potential tools; otherwise, motor damage could result!
S
Shelby MartinezAug 18, 2025
Why won't my Schwamborn Floor Machine start?
- S
  sherri47Aug 18, 2025
  If your Schwamborn Floor Machine won't start, several issues could be the cause: * The voltage supply may not be properly connected. Ensure the connecting cable (extension cable) is connected to a proper power socket. * The connecting cable might be defective. Replace the connecting cable. * A capacitor could be defective (ES 51S / STR 701L). Replace both capacitors. * There may be a faulty power supply. Try using a different power socket. * A safety switch could be defective. Replace the safety switch.
G
Gregory JohnstonAug 28, 2025
How to fix an uneven grinding pattern with a Schwamborn Floor Machine?
- T
  Tiffany DawsonAug 28, 2025
  An uneven grinding pattern with your Schwamborn Floor Machine can be caused by loose, damaged, or worn tools. To fix this: * Fasten any loose tools. * Replace any damaged or worn tools.