WHEEL INSPECTION
Wheels Out-Of-Round - Bicycle and trailer wheels must withstand
great force and weight. Watch for bent, loose or broken spokes that
may cause a wheel to go out-of-round. Because wheel truing is a com-
plicated procedure, we recommend that you take your bicycle to your
Authorized Schwinn Dealer.
TIRE INSPECTION
Replace tire if little or no tread remains, or if there is a cut that dam-
ages fabric in body of tire. Check to see that each tire is properly
seated in the rim and there are no bulges or defects.
HAND SIGNALS
Check behind and around you for approaching traffic. If other traffic is
affected by your turn, give the proper hand signal as shown, 50 feet
before you turn.
Wheel truing is a skill which requires special tools
and experience. Do not attempt to true a wheel
unless you have the knowledge and the tools
needed to do the job correctly.
CAUTION!
15
Right
Turn
Left
Turn
Slow
OR
Stop
To Next Page
Loading...
