©2010
TOOLS FOR ASSEMBLY
Your new bicycle was assembled and tuned in the factory and then parally disassembled for shipping. You may have purchased the bicycle
already fully assembled and ready to ride OR in the shipping carton in the parally disassembled form. The following instrucons will
enable you to prepare your bicycle for years of enjoyable cycling. For more details on inspecon, lubricaon, maintenance and adjustment
of any area please refer to the relevant secons in this manual. If you have quesons about your ability to properly assemble this unit,
please consult a qualied specialist before riding. If you need replacement parts or have quesons pertaining to the assembly of your
bicycle, call the service line direct at:
Tools Required:
• Phillips head screw driver
• 4mm, 5mm, 6mm and 8mm Allen keys
• Adjustable wrench or a 9mm, 10mm, 14mm and 15mm open and box end wrenches
• A pair of pliers with cable cung ability
To avoid injury, this product must be properly assembled before use. If your bicycle was obtained assembled, we strongly
recommend that you review the complete assembly instrucons and perform checks specied in this manual before riding.
We recommend that you consult a bicycle specialist if you have doubts or concerns as to your experience or ability to properly
assembly, repair, or maintain your bicycle.
ASSEMBLY
SERVICE & TECHNICAL SUPPORT
CALL TOLL FREE 1-800-THE-BIKE
27
To Next Page
Loading...
Need help?
General