Why is the reading on my Scian Blood Pressure Monitor so high/low?
If your Scian Blood Pressure Monitor reading is extremely low or high, ensure the cuff is at heart level and that your posture is correct. Also, wrap the cuff correctly. Relax and keep quiet during the measurement; avoid straining your arm, talking, or moving.
What to do if my scian LD-588 Blood Pressure Monitor pulse rate is too high or too low?
If your Scian Blood Pressure Monitor pulse rate is too low or too high, it may be because you were talking or moving your arm during the measurement; keep still and quiet. Also, avoid taking measurements immediately after exercise; rest for at least 5 minutes before trying again.
Why does my scian LD-588 stop inflating and re-inflate?
If your Scian Blood Pressure Monitor stops inflating and then re-inflates, this is likely due to the automatic inflation feature that ensures correct measurement. Also, make sure you are quiet and still during the measurement. Avoid talking or moving your arm.
How to fix a scian LD-588 with no display?
If your Scian Blood Pressure Monitor's display is blank when powered on, the batteries may be depleted; replace them with new ones. Ensure the batteries are installed with the correct polarity. Also, clean the battery terminals with a dry cloth if they appear polluted.
General| Brand | scian |
|---|---|
| Model | LD-588 |
| Category | Blood Pressure Monitor |
| Language | English |
Explains the oscillometric technology with Fuzzy Algorithm for BP and pulse measurement.
To Next Page
