USE THE DEVICE WITH AC POWER ADAPTER
Replace the batteries when the replacement indication “ ” appears
in the display or nothing after ‘O/I’ button is pressed;
The life-span of the batteries in this kit can be shorter than the
alkaline batteries;
Use R6,LR6 or AA alkaline batteries, do not use rechargeable
batteries;
Only same type batteries are allowed to use together. Replace all
batteries simultaneously;
If the device is to be unused for long time, please take out the
batteries;
Don’t leave the worn batteries in the device.
7
Besides batteries you can use AC power adapter as the
power supply. AC power adapter is optional for the
device for sale.
●Insert the AC adapter cord into the jack on the right
side of the monitor .
●Insert the AC adapter plug into the outlet.
●To remove the AC adapter, disconnect the adapter
plug from the AC outlet first and then disconnect the cord from the
monitor’s jack.
Caution
●When using optional AC adapter, the AC adapter must comply with
the requirements of standard IEC60601-1:1995.
●To avoid possible damage to the monitor, use only the exclusive AC
adapter that can be purchased from authorized dealers. Other adapter
may damage the blood pressure monitor.
Note: The monitor is designed not to draw power from the batteries
when the AC adapter in use.
Optional AC adapter technical feature:
Output voltage: 6V±5%
Max. output current: At least 600 mA
Output plug polarity: <-> inner
To Next Page
Loading...
