Scientific Games WaveXL BH-1CC49ST

Need help?

Do you have a question about the Scientific Games WaveXL BH-1CC49ST and is the answer not in the manual?

Summary

Preface

Revision History

Details document version changes over time.

Reference Information

Lists external documents and online resources for further details.

Contact Information

Provides regional phone numbers and emails for technical support.

Preventing Injury and Damage

Outlines critical safety precautions for machine operation and maintenance.

Environmental Protection and Recycling

Chapter 1 Overview

Prerequisites

Lists essential items required for machine installation.

Electrical Specifications

Details the electrical requirements including voltage, current, and power consumption.

Physical Specifications

Provides dimensions and weight for the machine cabinet.

Operating Environment (Recommended)

Specifies optimal temperature and humidity ranges for machine operation.

Dimensions

Illustrates cabinet dimensions with front and side views.

Chapter 2 Instructions

Unpacking and Inspecting the Machine

Step-by-step guide for unboxing and checking the machine for damage.

Lock and Cam Specification

Identifies different lock types and their corresponding part numbers.

Door and Lock Locations

Diagram showing the location of various locks and doors on the cabinet.

Opening and Closing Doors

Instructions for safely opening and closing the main, lower, and cash box doors.

Securing the Machine

Procedures for installing and positioning the machine securely in its location.

Chapter 3 Operational Tasks

Attendant Pays and Canceling Credits

Procedures for handling attendant-initiated payments and credit cancellations.

Collecting Bills from the Machine

Steps for safely accessing and emptying the bill acceptor cash box.

Refilling the Printer Paper

Instructions for replacing the paper roll in the machine's printer.

Chapter 4 Spare Parts

Spare Parts

A table listing part numbers, descriptions, and quantities for spare components.

The Wave XL™ (BH-1CC49ST) is a base hybrid cabinet designed for gaming, featuring a CPU-4X, a 49-inch concave curve video monitor, and a standard top. This document provides operating instructions for the cabinet, covering setup, operational tasks, and spare parts.

Function Description:

The Wave XL™ cabinet serves as a platform for gaming operations, displaying features supported by its software version, jurisdiction, and machine configuration. It is designed for use in various gaming environments, with an emphasis on secure and correct operation. The cabinet allows for player interaction through its monitor and other components, and it includes mechanisms for bill acceptance, ticket printing, and attendant services.

Important Technical Specifications:

Electrical Specifications:
- Line Voltage: 120-240 VAC
- Surge State Current: 3.5 Amps
- Operating State Current: 3.3-1.7 Amps
- Max Load: 6.0 Amps
- Power Consumption: 1265 BTU/HR
- Note: Actual current use may vary depending on machine configuration and additional supplemental equipment.
Physical Specifications (Cabinet with Topper):
- Weight (Un-crated including Flammable Weight): 425 lb (192.8 Kg)
- Flammable Weight: 21 lb (9.5 Kg)
- Dimensions:
  - Length: 2590 mm (101.95 inches)
  - Width: 780 mm (30.70 inches)
  - Depth: 851 mm (33.52 inches)
Operating Environment (Recommended):
- Temperature Range: 4-40 Degrees Celsius (39.2-104 Degrees Fahrenheit)
- Humidity (Maximum): 90%
- Caution: Operating outside these guidelines may increase maintenance requirements.
Prerequisites for Installation:
- Locks (quantity 5 to 9 depending on machine configuration)
- Category 5 network cables (quantity and length depending on machine configuration and floor plan layout)
- Tools for locks: 22 mm (7/8-inch), 11 mm (7/16-inch), and 10 mm (25/64-inch) socket or wrench, nut driver, needle nose pliers, Phillips head screwdriver, set of Allen wrenches.
- Operating system software manual.
Lock and Cam Specifications:
- Lower Door Single Lock: Cam Part Number 1497145
- Lower Door Double Lock: Cam Part Number 1508485
- Bill Acceptor Cash Box Access Door Single Lock: Cam Part Number 1497144
- Bill Acceptor Cash Box Access Door Double Lock: Cam Part Number 1508483
- Bill Acceptor Cash Box Door Single Lock: Cam Part Number 1497471
- Bill Acceptor Cash Box Door Double Lock: Cam Part Number 1508657
- Note: Spare locks and spacers (1.6 mm, 28.6 mm) should be kept available.
Spare Parts (Examples):
- Monitor Pod Assembly, Nano, Black: Part Number 1507025-97-ALT1
- iDeck™ Assembly, Nano, CTS 108 Touch: Part Number 1492846-01-ALT1
- CPU Assembly, CPU-4.2.2X, A5: Part Number 1458954
- ES8870 Graphics Card, MXM3.0, Board, Display Port Configuration: Part Number 1449538 (1458954)
- Memory Module Assembly, SO-DIMM, DDR3L-1600, 4G, 512M*64B, Un-buffered: Part Number 1436714 (1458954)
- CPU Assembly, CPU-4.1.2X, I7 P, E9550, 16GB RAM, 128GB SSD, A5** (Premium Games Only): Part Number 1507777
- Lithium Battery, AA, 1.5V, 3000MAH: Part Number 1452919
- Solid State Drive, 128GB, MO-297, SATA III, MLC: Part Number 1466154
- Coin Cell Battery, 3v, 20mm: Part Number 6880-017813-00-00
- Power Supply, 600W, Single Output, 24 VDC with Integrated IEC Connector: Part Number 1454332

Usage Features:

Unpacking and Inspection:
- Remove plastic packaging and all loose parts from boxes/bags.
- Verify serial numbers match shipping documents.
- Inspect for shipping damage (dents, scratches).
- Remove internal packing materials.
- Ensure interior cables are firmly connected and circuit board assemblies have no loose connections.
- Open logic door, re-seat flash media if necessary.
- Contact distributor for RMA if damaged or parts are missing.
Door Operation:
- Main Door: Turn main door lock clockwise, pull silver handle, lift the monitor on each side to open. To close, lower the monitor until it rests parallel with the machine, then push towards the machine until it clicks into place.
- Lower Door: Turn lower door lock clockwise, swing door from right to left to open. To close, swing from left to right until it securely connects to the cabinet.
- Bill Acceptor Cash Box Access Door: Turn lock clockwise, swing door from left to right to open. To close, swing from right to left until it securely connects to the cabinet.
- Lower Cabinet Panel: Open lower door and bill acceptor cash box access door. Pull tab at the top of the panel towards you to open. To close, align the bottom of the panel with the machine base, align white plastic squares with the top of the cabinet, and push until it clicks into place.
- General Door Safety: Secure doors with locks, inspect latches/hinges for wear, hold/support doors when opening/closing, ensure no foreign objects in door frame, and avoid excessive force.
Securing the Machine:
- Ensure the new location has appropriate power and network cabling.
- Use a lifting/moving device (e.g., hand truck with solid tires) to move the machine.
- Place the machine at the desired location, ensuring the back and sides are not exposed or accessible by players.
- Do not place the machine on wires or cables.
- For multiple cabinets, place them side-by-side or back-to-back and secure them if applicable.
- Examples for placement: against a wall/corner (single cabinet or single line), back-to-back (multiple freestanding, even numbers), in pods (multiple freestanding, odd numbers), or in a tower configuration (multiple grouped, even numbers).
Operational Tasks:
- Attendant Pays and Canceling Credits: For lockups (e.g., Jackpot Handpay Pending, Cashout Handpay, Pay Win Handpay), pay the player, then turn the attendant key switch (audit key switch) to restore operation.
- Collecting Bills from the Machine: Open the bill acceptor cash box access door, turn the bill acceptor cash box door lock clockwise, pull the cash box door down, remove the full cash box, insert an empty one, then close and lock both doors.
- Refilling the Printer Paper: Open the main door, place the paper in the paper tray in the correct orientation, insert the paper into the printer mechanism, and close the main door.
- Note: Printer paper refill procedures depend on machine model, added equipment, and jurisdiction. Use appropriate coupon paper matching printer size and capacity.

Maintenance Features:

Preventing Injury and Damage:
- Preventing Shock: Always remove power before service tasks.
- Preventing ESD: Use appropriate ESD mitigation procedures.
- Replacing Power Cord: Must be replaced by the manufacturer, service agent, or similarly qualified persons.
- Securing and Venting Equipment: Cabinet, top, or accessory box must be correctly secured and installed with adequate ventilation.
- Ladder Safety: Follow company-mandated ladder safety procedures, do not exceed maximum load rating, and be aware of weight supported.
- Caution: If a new machine is damaged, do not remove existing parts for use in another machine.
Environmental Protection and Recycling:
- The product bears a WEEE recycling mark (European Commission Directive 2012/19/EU), indicating it should be deposited at an appropriate facility for recovery and recycling.
- Contact local government authority for environmentally sound disposal methods.
- Information on product take-back programs is available on the Scientific Games website.
Documentation and Support:
- Revocation Bulletins, Service Manuals, and other documents are available online at https://www.sggaming.com/members/login.
- Specific documents include the Service Manual and User Guide for ArgOS 2.X Operating System, Service Manual 1493373: CPU-4.2.2.X Control Subsystem, and Design Guidelines SY-TP007000-500: Player Tracking System Design Guidelines for Wave XL (x500) Cabinet with 49-Inch Curved Monitor.
- Contact information for technical support is provided for Americas, Asia (Macau, Singapore), Australia/New Zealand, and Europe/Middle East/Africa (EMEA).