Scientifica PatchStar - Packing List and System Components; PatchStar Micromanipulator System; Ultra-low Noise Controller Rack; Axis Control Cube (ACCI)

-
2 –
Packing list
The Scientifica PatchStar is a piece of scientific equipment and as such requires
care when handling. If the outside of the shipping packaging is damaged, notify
your shipping department immediately. The shipping department may wish to
notify the carrier at this point.
If the shipping carton is not damaged, carefully remove and identify all of the
components as listed below.
The PatchStar system includes:
• PatchStar Micromanipulator
• Ultra Low Noise Controller rack
• Axis Control Cube
• Joystick Module (optional)
• Operating Manual
• PatchStar 25 Way to 25 Way Cable
• PatchStar breakout box
• Mains Cable
• Mounting screw Kit
• Configuration software
• RS232 cable
If any of these items are missing, contact, Scientifica Ltd. Please retain the
packaging for future storage or transportation of the system.
System Components:
PatchStar Micromanipulator
The Scientifica PatchStar is a highly stable positioning system designed for ultra
precise positioning of electrodes. The micromanipulator utilizes high precision
stepper motors and anti-backlash lead screws to achieve ultimate control. The
stage provides 20mm travel in X Y and Z axis.
Ultra-low noise controller rack
The Ultra-low noise controller rack provides a sophisticated means of driving the
Scientifica range of stepper motor actuated products. This can be driven via any
of the Scientifica Ltd user interfaces or directly from a pc.
Axis Control Cube (ACCi)
The ACC provides a convenient method of controlling the position of the
manipulator.
Optional Joystick Module
The joystick provides an alternative method of positioning the manipulator.
Special function buttons provide programmable position setting.