Scion Instruments 400-GC Series User Manual

SCION Instruments HQ SCION Instruments NL BV
Suite 34, Livingston Business Centre, 4462, Goes,
Kirkton Road South, Livingston, Stanleyweg 4.
EH54 7FA, Scotland, UK. The Netherlands
Tel: +44 1506 300 200 Tel: +31 113 348 926
sales-eu@scioninstruments.com sales-eu@scioninstruments.com
www.scioninstruments.com www.scioninstruments.com
Revised March 2019
© 2015 Scion Instruments
Reference Manual
Natgas C Analyzer
With Additional He/H
2
Channel

Scion Instruments 400-GC Series Specifications

General

Brand	Scion Instruments
Model	400-GC Series
Category	Measuring Instruments
Language	English

Summary

INTRODUCTION

INSTRUMENT SPECIFICATIONS

START UP

Instructions for initial instrument power-up and preparation for analysis.

INSTALLATION OF COLUMNS, FLOW AND PRESSURE SETTING

Replacement columns

List of specific columns used in the analyzer with their part numbers and specifications.

TUNING THE NATGAS C ANALYZER

OPERATION

TROUBLE SHOOTING

STEP BY STEP

Initial Position Schematic

Diagram illustrating the initial configuration of the gas chromatograph valves and flow paths.

Fill Position Schematic

Diagram illustrating the system in the fill mode for sample loop loading.

Inject Position Schematic

Diagram depicting the system configuration during sample injection.

Backflush Position Schematic

Diagram showing the system operating in backflush mode.