9
Changzhou Sciwil E-
Mobility Technology Co., Ltd.
9
th
Huashan Road, Changzhou, Jiangsu, China- 213022
Fax: +86 519-85602675 Tel: +86 519-8560067
· Enter/Exit Walk Mode, Cruise Mode and Turn on Headlight:
- When your e-bike stops, press and hold Mode to enter 6km/h walk mode.
- During riding, press and hold Mode to enter real-time cruise. When in
cruise mode, press and hold Mode to exit.
- When the display is on, press Mode for 3s to turn on/off the headlight.
· Switch Displayed Items in Versatile Area
When the display is on, press On/Off to switch displayed items in versatile area.
· Settings
- Press and hold Plus and Minus to enter Settings interface. Setting items include:
Backlight Brightness, Unit, Voltage Level, Auto-Off Time, PAS Level, Wheel Size,
Motor Magnet Numbers, Speed Limit, Direct Start and Kick-to-Start Mode, Drive
Mode, PAS Sensitivity, PAS Start Power, PAS Sensor Type, Controller Current Limit,
ODO clearance, etc.
- In Settings, press Mode to switch the above setting items; press Plus or Minus to
Set parameter for the current item. The parameter will blink after set, press Mode
To the next item and the previous parameter will be automatically saved.
- Press and hold Plus and Minus to exit Setting, or standby for 10s to save and exit.
To Next Page
Loading...
Need help?
General
