SCM SIGMA N 90 - User Manual

Need help?

Do you have a question about the SCM SIGMA N 90 and is the answer not in the manual?

Summary

Section 1 - General Information and Safety

Machine Identification

General Safety Information

Outlines general safety rules and precautions for safe machine operation and user protection.

Safety Signs and Plates - Description

Safety Signs and Plates - Position

Machine Description

Residual Risks

Details potential residual risks that may remain even when safety regulations are followed.

Prohibitions of Use

Lists prohibited uses, modifications, and actions to ensure safe and correct operation of the machine.

Technical Characteristics (Standard Machine)

Safety Devices

Illustrates and describes the safety devices integrated into the machine to protect operators.

Section 2 - Installation

Machine Installation

Outlines the general procedures and precautions for installing the machine, requiring skilled personnel.

Transport, Packaging and Unpacking

Handling

Provides guidance on selecting appropriate lifting and handling equipment and personnel for moving the machine.

Element Assembly, Removal of Locks and Levelling

Details the steps for assembling machine components, removing transport locks, and leveling the machine body.

Fixing to the Floor

Electrical Connection

Provides instructions for the electrical connection of the machine, emphasizing safety and correct wiring.

Air Connection

Details the procedure for connecting the machine to the compressed air supply system, including pressure checks.

Suction Connection

Explains how to connect the machine's suction system to the general dust extraction system.

Section 3 - Use and Adjustment

Machine Preparation

Outlines essential preparation steps before operating the machine, focusing on operator training and safety.

Electric Panel - Description of Commands and Control Functions

Machine Starting

Provides instructions for starting the machine, covering both automated and manual operating modes.

Machine Stopping

Details procedures for stopping the machine, including normal cycle stops and emergency stops.

Criteria for Proper Use of the Tools

Outlines guidelines for the correct and safe use of cutting tools, including selection and handling.

Assembly and Disassembly of the Blade and Engraver

Explains the procedures for mounting and dismounting the saw blade and engraver, covering different locking versions.

Engraver Adjustment

Details how to adjust the engraver, including manual vertical and horizontal settings.

Manual Vertical Adjustment

Manual Horizontal Adjustment

Positioning Check between Engraver and Blade - Test Cuts

Clamp Height Adjustment

Adjustment of Engraving Depth in Panel (“Groove”)

Manual Groove Adjustment

Postforming Engraving Execution (if present)

Adjustment of Perpendicularity between the Wood Guide and the Cutting Line

Details how to adjust the wood guide for precise, perpendicular cuts relative to the cutting line.

Approach Device Positioning

Adjustment of the Cross-Cut Aligner

Section 4 - Maintenance

Maintenance and Cleaning

Covers general procedures for machine maintenance and cleaning, emphasizing safety and qualified personnel.

Cleaning and Tensioning of the Blade Carriage Driving Chain

Air Treatment Unit Adjustment

Blade Locking Seal Replacement (if pneumatic blade locking)

Elevator Table Chain Maintenance and Adjustment (version P only)

Blade Carriage: Guide Lubrication

Pusher Unit: Replacements and Adjustments

Covers the replacement and adjustment of pusher unit components for optimal performance.

Encoder Replacement and Adjustment

SCM SIGMA N 90 Specifications

General

Brand	SCM
Model	SIGMA N 90
Category	Saw
Language	English

Related product manuals

SCM SIGMA N 65

155 pages

SCM SIGMA N 115