scope ReFlex Series - Installation Guidelines; Ventilation; Surface Requirements; Door Opening Space

Installation Guidelines
Ensure the installation guidelines below are considered and met .
Ventilation Requirements
This cabinet must have the following ventilation clearances at all times:
Ventilation
Ensure all ventilation
requirements below are
met.
Door Opening
Allow adequate space for
the door to open and
close properly.
Sunlight
Do not install the cabinet
in direct sunlight.
Uneven Surface
Do not install the cabinet
on an uneven surface.
Surface
The installation surface
must be capable of
supporting the loaded
cabinet.
Power Supply
Do not overload the power
supply.
Blocking Ventilation
Do not store boxes or items in
front or on top of the cabinet.
Climate Class
The cabinet must be
installed in an environment
within its climate class.
The climate class is stated
on the cabinet rating label
inside the fridge, and
explained on the front page
of this user guide.
Min 30mm below, provided by cabinet feet
No above clearance required
Keep area in front
of grille and door clear
Min. 50mm
each side
Min. 35mm behind,
provided by rear spacer
ReFlex 1-Door Underbench Fridge & Freezer