1 2
3
4 5
6
7 8
12 13
English
English
scoreseating.com / +31 (0) 594 55 40 00 / info@scoreseating.com scoreseating.com / +31 (0) 594 55 40 00 / info@scoreseating.com
mounting
Insert the castors
into the base
Press the seat
onto the gaslift
Turn the lumbar support
handle back down and lock
the height position of the
lumbar support
Remove the cap
from the gaslift
Turn the lumbar support
handle up a quarter turn
Insert the locking pins
into the back bar
Insert the gaslift
into the base
Place the lumbar support in
the mechanism
cleaning
Cleaning of surfaces, chrome-plated and
coated parts and castors
Clean the parts with a damp cloth, possibly
with a mild detergent without abrasives. After
using a damp cloth, dry parts with a dry cloth.
The thinner tube on the gasspring is equipped
with grease and a grease scraper. This tube
keeps itself clean. The greasy part should never
be wiped with water or any other detergent.
Cleansing method Stamskin Top
Wipe Stamskin Top daily with a damp lukewarm/
warm cloth. If necessary, use a mild soap (Ph
neutral, free of acidic or alkaline excipients).
Do not use alcohol, chlorine, ammonia or
acid-based cleaning products during regular
maintenance. Also, do not use solvents or
abrasives. After cleaning, dry the upholstery
with a dry cloth.
For general stains, we recommend Stamskin
Cleaner. Using a soft brush, you can apply
Stamskin Cleaner to the surface to be treated
with circular movements. Leave the Stamskin
Cleaner on for 3 minutes. Then use a dry cloth
to remove the Stamskin Cleaner along
with the dirt.
If blood or other bodily substances come into
contact with the Stamskin Top upholstery,
disinfect it immediately with a cold solution of
10,000 ppm chlorine and water. After wiping
with a clean wet cloth, wipe the area and then
dry with a clean dry cloth.
A list of tested cleaning products is available
for Stamskin Top. If you have any doubts about
your cleaning product, please contact the
Score supplier.
Cleaning method PUxx
Wipe PUxx daily with a damp lukewarm/warm
cloth, use a cleaning agent if necessary. PUxx
is resistant to most cleaning and disinfecting
agents based on 70% alcohol, chlorine or
ammonia. Follow the instructions of the
disinfectant manufacturer. Always wipe the
cleaning and disinfecting products with a clean
damp cloth. Do not use solvents or abrasives.
After cleaning, dry the upholstery with
a dry cloth.
Occasionally wipe the PUxx parts that come
into contact with the skin (e.g. upholstered
armrests) with sufficient warm water in
combination with Nirocleaner or another
alkaline cleaning agent to remove the
remaining soap and skin oils. Use a brush if
necessary. It is best to leave these cleaning
products on for 3 minutes before removing
the detergent and dirt with a cloth with clean
water. By properly removing the cleaning
product, contamination is less likely
to take place.
Remove blood stains immediately with a
cold disinfectant. After disinfecting,
dry the upholstery with a dry cloth.
Stamskin Top properties
Multi-layered artificial leather PVC on a
polyamide-jersey base cloth.
Resistant to urine, blood, sweat,
mould, and water.
Abrasion resistance > 120,000 Martindale
(EN ISO 5470-2).
Fire-resistance: M2/NFP92.507, Test cigarette
/ Match EN 1021.1-1021.2, IMO MSC.307 (88)
(201 FTP Code) Annex 1 part 8, Aeronautical
test FAR/JAR 28-853/855.- Fungicidal: Degree
0, excellent (EN ISO 846-A).
Sanitized® hygiene function: protection
against mould and algae formation.
Biocides: Stamskin Top contains Folpet
(Nº528/2012/CE-Folpet), a fungicidal additive
that is used to preserve the exterior and
physical properties of these items, and to
extend their service life. Folpet is a phthalate
(plasticizer). Patient chair with PUxx upholstery
is free from phthalates/plasticizers
cleaning
mounting
To Next Page
Loading...