Scosche PSM31000 User Manual

BASE-CLAMPS
HOW IT WORKS:
STEP 1
Select the right size clamp
(Various sizes sold
separately)
STEP2
Select the base & ring
clamp that coincides with
what you need to mount
2A. Use protective film
to
prevent any paint
damage 28.
STEP3
Lock it in place
The self locking clamp design
allows for easy for easy one
person installation. Simply slip the
clamp over tube and lock in your
base, secure using the stainless
mounting hardware and you are
ready to Mount Up and Move Out.
NOTE: Ring clamps 2" & over in size may
require pre-stretching to help spread the
clamp over the tube. (Use Protective film
when mounting)
Register your product online at
www.scosche.com/register
PSM31000
PHONE HOLDER BASE CLAMP
PARTS INCLUDED
(1) Protective Weatherproof Phone Bag
(1) Phone Holder Base Mount
(1) 3/16" Screw (for case positioning)
(1) Smartphone Case Mounting Adapter
TOOLS REQUIRED (Not Included}
3/16" Hex (Allen) Key, Except where noted
"VARIOUS TUBE CLAMP
SIZES
SOLD
SEPARATELY
w/
HARDWARE@..•
PSC21006 - BaseClamp 1.5" Tube Clamp
PSC21007 - BaseClamp 1.625" Tube Clamp
PSC21009 - BaseClamp 1.75" Tube Clamp
PSC21010 - BaseClamp 1.85" Tube Clamp
'·'
PSC21011 - BaseClamp 1.875" Tube Clamp
PSC21012 - BaseClamp 2" Tube Clamp
For complete warranty details, please visit us at
www.scosche.com
or
call (800) 363-4490

Scosche PSM31000 Specifications

General

Brand	Scosche
Model	PSM31000
Category	Cell Phone Accessories
Language	English

Summary

Base-Clamps How It Works

Select Clamp Size

Select the correct size clamp for your needs, as various sizes are sold separately.

Select Base and Ring Clamp

Choose the base and ring clamp that matches your mounting requirements.

Use Protective Film

Apply protective film to prevent paint damage during installation.

Lock Clamp in Place

The self-locking clamp allows for easy, one-person installation.

Available Tube Clamp Sizes

List of various tube clamp sizes sold separately with hardware for the base clamp.

Important Information

Customer Support and Returns

Contact customer support for assistance or replacement parts; do not return to retailer.

Phone Case Adapter Setup Guide

Align Adapter to Case

Align the case adapter to the backside of the case and insert into the lower slot.

Lock Adapter into Case

Once inserted, slide the adapter upwards to lock it firmly into the case.

Attach Adapter to Base

Align the case adapter's front side to the bottom of the base and fasten with a hex key.

Adjust Case Position

Loosen the screw to adjust case positioning, then tighten to secure.

Mounting the Phone Holder Base Clamp

Choose Mounting Location

Select a suitable location on the vehicle for mounting the base clamp.

Mount Base to Clamp Ring

Attach the base to the appropriate sized clamp ring for the vehicle, not exceeding 200 inch-pounds.

Fasten Clamp Assembly

Use a hex key to fasten the screw and nut, continuing until the clamp is tight.

Clamp Removal Instructions

Tighten clamp to allow base removal, then loosen and squeeze to remove from location.