Check the operating pressures of the refrigerant system
connecting the gauges on hi and low service valve.
The operating pressures at the end of the freezing cycle with
unit at 21ºC ambient and 10°c water inlet should be:
SERVICE ANALYSIS
MODEL
max
min
bar
Suction
Pressure
Beginning
Freeze bar
Suction
bar
minutes
18 13 32,5 4,2 2,4 17
15,4 14 32,5 3,4 2 13
17 11 32,5 3 1,8 16
17 14 32,5 2,6 1,4 14
17,5 14,5 32,5 3,2 1,7 12
18 15 32,5 3 1,4 14
17,5 15,8 32,5 3,6 2 18
16 15,5 32,5 3,2 1,6 14
18 17,5 32,5 3 1,4 15
17 16 32,5 3 1,4 15
18 17 32,5 3 1,7 13
18 17 32,5 3 1,7 13