22
- chain wear and tension ( on bikes equipped with
internal gear hubs). Readjust if necessary, clean
and grease the chain.
- Bottom bracket cartridge for play, if necessary
replace it.
- Pedal bearings for play, if necessary replace them.
- front and rear derailleur for perfect function and
grease them. If necessary readjust the system and
clean it.
- stem and handlebar for visible damages and repla-
ce them if necessary. Please make sure that the
bolts are tightened evenly when closing the front
cap, according to the tightening torque recommen-
ded by the producer of the parts.
- Complete brake system on perfect function and
readjust and grease it if necessary. Replace worn
out or defective parts. Replace leaking hydraulic
pipelines at once .
- Rims and tension of spokes. If necessary true them.
- Air pressure of the tires according to the recom-
mendation of the producer.
- Overall condition of the tires
- Light systems and bell
- Handlebar grips to be fixed to the handlebar
- All parts of the rear suspension system including
mounting bolts
- The front suspension fork on perfect function and
play in the bushings.
- Frame and fork on perfect condition, replace in
case of damages
PLEASE CHECK IF NECESSARY
OR AT LEAST ONCE A YEAR AT
YOUR LOCAL DEALER
For buying spare parts we strongly recommend to
visit your local Scott dealer as he knows best
which parts will fit to your bike and can help you
to make your choice of parts matching to your
bike.
By doing so, you can avoid a combination of parts
that might not match to each other.
Please only use original spare parts as only these
can guarantee optimum function and safety while
riding.
This is extremely important on parts of the brake
system, the tire and air tube.
Please note that Scott is not responsible for dama-
ges caused by not using original spare parts.
Never use adapter solutions to fix or assemble
brakes, seat/seatpost and stem/handle bar!
SPARE PARTS FOR YOUR SCOTT
BIKE
In order to keep the function and optic of the bike in
good condition we recommend periodical bicycle care.
Doing so keeps the value of the bike and helps to pre-
vent from corrosion or other damages:
- clean with soft brush, water and soft towel. Do not
use high pressure cleaner, otherwise bearings,
color or decals can be damaged.
- Do not use aggressive cleaning additives
- Repair color damages at once
- Grease or oil all metal parts especially during win-
ter use
Please use biodegradable bicycle cleaners and
degreasers which are offered at your local dealer.
BICYCLE CARE
ENGLISH
23
DEUTSCH
FRANÇAIS
OWNER MANUAL 2005
To Next Page
Loading...
Need help?
General
