To Next PageTo Next Page
Need help?Do you have a question about the SCOTT 2015 PLASMA 5 and is the answer not in the manual?
General| Headset | Syncros Integrated |
|---|---|
| Wheel Size | 700c |
| Frame Geometry | TT / TRI |
| Rear Derailleur | Shimano Dura Ace RD-9000 |
| Front Derailleur | Shimano Dura-Ace FD-9000 |
| Shifters | Shimano Dura-Ace SL-BSR1 Barend |
| Crankset | Shimano Dura-Ace FC-9000, 53x39T |
| BB-Set | Shimano SM-BB92-41 |
| H'stem | Profile Plasma 5 |
| Seat | Scott Sport |
| Chain | Shimano Dura Ace CN-9000 |
| Cassette | Shimano Dura-Ace CS-9000, 11-25 |
| Tires | Continental Grand Prix 4000 S II / 700x23C |
| Speed | 22 |
Specifies the diameter of the headtube and bearing type.
Details the bottom bracket housing type.
Information on the rear brake caliper compatibility.
Compatibility information for front brake calipers.
Details the specific front brake cover for the Plasma 5.
Options for seatpost saddle rail clamp compatibility.
Notes compatibility of the rear hanger with different models.
Indicates compatibility with mechanical and electronic shifting.
Details on using the setup screw for chainstay length adjustment.
Procedure for installing the rear derailleur hanger.
Instructions for routing FD/RD wires for electronic shifting.
Steps for routing handlebar command wires for electronic shifting.
Instructions for routing rear brake cable housing.
Guidance for routing front brake cable housing.
Instructions for routing RD cable housing for mechanical shifting.
Routing for RB and FD cable housings in mechanical shifting.
Guidance for front brake cable housing routing.
How to install the front derailleur cable guide.
How to route the front derailleur cable through the exit hole.
How to use the setup screw for fork height adjustment.
Information on standard dropout adjustment screws.
Step-by-step guide for headset and stem body assembly.
Guide for assembling the saddle onto the seatpost.
Steps for inserting and securing the seatpost into the frame.
How to assemble the battery mount with the seatpost.
How to cut and route brake cable housings.
Routing command wires for electronic shifting.
Routing wires for TT extension shifters.
Guides for assembling the handlebar onto the stem.
Step-by-step assembly of the front brake caliper and fork.
Crucial step for aligning the front brake booster.
Guide to cutting and installing the front brake cable.
Key points for proper cable clamping and brake pad adjustment.
Guide for fitting the front brake cover.
Guide for fitting the rear brake cover.
Steps for mounting the storage box onto the frame.
Instructions for assembling the integrated bottle and straw.
