Ø12mm
142mm
Rear:
• 12mm through axle
• pitch 1.5mm
• 142mm hub
ENGLISHENGLISH
•
RD HANGER
The Addict Disc/Gravel/CX uses the same design as the Solace Disc, so the derailleur hanger
is interchangeable.
239530 Dropout hanger Solace Disc '15<
•
REAR BRAKE MOUNT
The front and rear brake mount on the Addict Disc/Gravel/CX is the new Shimano flat
standard.
The brake mount is as well compatible with the post mount standard. In this case it’s
essential to use an appropriate adapter.
•
AXIS STANDARDS
To improve the stiffness, the Addict Disc/Gravel/CX has some threaded through axis in the
front and rear.
The front axle is a 100mm x 12mm
242431 Axle RWS Front Road
Disc >16 / Ø12MM
The rear axle is a 142mm x
12mm axle
239528 Axle 12mm rear Solace
Disc '15
•
CABLE ROUTING
The Addict Disc/Gravel/CX features a total internal cable routing and is compatible with
every common shifting system. Whatever shifting system is installed on the bike, there is one
replacement kit which includes every necessary part.
242433 Cable fixing set Addict CX '16
Dropout hanger Solace Disc '15<
09 |
2016 BIKE USER MANUAL | ADDICT DISC/GRAVEL/CXADDICT DISC/GRAVEL/CX | 2016 BIKE USER MANUAL
| 08