3130
Adjust the brake housing to the correct length so that
steering remains unrestricted.
Install the front brake on the fork.
FOIL BUILD UP MANUAL / SCOTT / FOIL / 2016
To install the crankset, push the axle through the bottom bracket. Tighten the cover screw
with the respective Shimano tool and make sure it doesn’t sit too tightly. Tighten the bolts
on the left crank arm to 13-15Nm. Use a torque wrench to avoid overtightening of the bolts.
Shorten the chain to the correct length and mount it by using a chain
tool for Shimano. Make sure the orientation of the chain is correct.
To Next Page
Loading...
Need help?
General
