To Next PageTo Next Page
Need help?Do you have a question about the SCOTT SCALE 700 and is the answer not in the manual?
Details on the use of HMX-SL, MR70, YS60, and HR40 carbon fibers for frame construction.
Explanation of SDS2 technology for achieving comfort without sacrificing stiffness in carbon frames.
How the Boost standard enhances wheel stiffness and tire clearance on the new Scale frame.
Distinction between HMX-SL/HMX (1x) and HMF (2x or 1x) frame optimizations.
Key technical specifications for the Scale 3 900 including seatpost, headset, and fork details.
Detailed geometry measurements for various frame sizes (S, M, L, XL).
Explanation of the RideLoc system for controlling front fork modes: Climb, Traction, and Descent.
Recommended tools and initial steps for setting up the bike's front suspension forks.
Instructions for setting the correct SAG percentage for optimal fork performance.
Guidance on adjusting the fork's rebound speed for proper suspension response.
Information on replacing the rear derailleur hanger for Sram and Shimano direct mount systems.
Details on using 160mm or 180mm brake rotor adaptors for the rear brake mount.
Explanation of interchangeable headtube cable guides for various cable configurations.
Information on the PF92 bottom bracket and front derailleur mounting for non-RC models.
Advice on performing adjustments and torque settings, including dropper seatpost torque.
Details on what the voluntary manufacturer's warranty covers and its duration.
List of conditions and defects not covered by the limited warranty.
Procedure for notifying SCOTT and returning products for warranty inspection.
General
