Need help?Do you have a question about the SCOTT SPARK MY22 and is the answer not in the manual?
Details about the SRAM UDH rear hanger and its part number.
Instruction for UDH assembly torque and grease.
Specific rear axle model and its part number.
Guidance on rear axle assembly with grease and torque.
Details on the SCO Brake Mount Spark 22 for 160/180mm.
Note about conical washers for the 180mm brake mount.
Available chainstay protector options and part numbers.
Size-specific maximum seatpost insertion limits for different frame sizes.
Specification for SYN Headset ZS56/28.6 - ZS56/40 MTB.
Details of the SCO Headset Cup Kit Spark 22, including cups.
Caution against using standard headset removal tools.
How to identify headset cups by their angle stamps.
Pre-installed headset cups and head angle adjustment details.
Correct orientation for installing 0.6° headset cups.
List of available SCO Stem Spacer/top cap kits.
Details of the Headset Spacer Kit contents and part number.
Information on the SCO Cable/Shock DT Cover Spark 22.
Details for the SCO Handlebar Cableguide Kit MTB IC 22.
Specification of the SCO Cableguide & BB Cover Spark 22.
Note on bottle cage capacity for small frames.
Instructions for using the shock pump valve head and applying pressure.
Information on the tolerance of shock pump indicators.
Attaching the upper shock pump head to the valve.
Connecting the lower pump head to the upper pump head.
Ensuring no gap and pumping to the required pressure.
Procedure for unscrewing the lower shock pump head.
Removing the upper shock pump head from the shock valve.
Ensuring shock and forks are in open position before adjustment.
Pumping pressure and equalizing air chambers by cycling the shock.
Sitting on the bike in riding position to set sag.
Using markings to check and adjust sag position.
Recommended sag range for optimal performance.
Explanation of rebound and its importance for handling.
How to find the rebound adjustment lever on the shock.
Method for testing rebound by riding off a kerb.
How to adjust rebound based on bouncing behaviour.
Warning about using non-specific shocks or forks.
Note on bolt type, size, and torque before removal.
Removing rear wheel, crankset, and disconnecting seatstay/linkage pivot.
Procedure to remove the lower shock cover.
Remove lower shock bolts and disconnect the TC Cable.
Rotate linkage to access the upper shock bolt.
Remove shock, ensure correct torque and threadloc on re-installation.
Diagram illustrating internal cable routing for the rear derailleur.
Diagram showing internal routing for the rear brake hose.
Illustration of internal cable routing for the dropper seatpost.
Diagram showing internal routing for the Twinloc system.
What the warranty covers for frames, swingarms, and forks.
Information on warranty period, required maintenance, and transferability.
List of conditions and defects not covered by the limited warranty.
Procedure for notifying SCOTT and returning products for inspection.
Disclaimer regarding information accuracy, updates, and availability.
Contact information for SCOTT Sports SA, including address and web.
Details about the SRAM UDH rear hanger and its part number.
Instruction for UDH assembly torque and grease.
Specific rear axle model and its part number.
Guidance on rear axle assembly with grease and torque.
Details on the SCO Brake Mount Spark 22 for 160/180mm.
Note about conical washers for the 180mm brake mount.
Available chainstay protector options and part numbers.
Size-specific maximum seatpost insertion limits for different frame sizes.
Specification for SYN Headset ZS56/28.6 - ZS56/40 MTB.
Details of the SCO Headset Cup Kit Spark 22, including cups.
Caution against using standard headset removal tools.
How to identify headset cups by their angle stamps.
Pre-installed headset cups and head angle adjustment details.
Correct orientation for installing 0.6° headset cups.
List of available SCO Stem Spacer/top cap kits.
Details of the Headset Spacer Kit contents and part number.
Information on the SCO Cable/Shock DT Cover Spark 22.
Details for the SCO Handlebar Cableguide Kit MTB IC 22.
Specification of the SCO Cableguide & BB Cover Spark 22.
Note on bottle cage capacity for small frames.
Instructions for using the shock pump valve head and applying pressure.
Information on the tolerance of shock pump indicators.
Attaching the upper shock pump head to the valve.
Connecting the lower pump head to the upper pump head.
Ensuring no gap and pumping to the required pressure.
Procedure for unscrewing the lower shock pump head.
Removing the upper shock pump head from the shock valve.
Ensuring shock and forks are in open position before adjustment.
Pumping pressure and equalizing air chambers by cycling the shock.
Sitting on the bike in riding position to set sag.
Using markings to check and adjust sag position.
Recommended sag range for optimal performance.
Explanation of rebound and its importance for handling.
How to find the rebound adjustment lever on the shock.
Method for testing rebound by riding off a kerb.
How to adjust rebound based on bouncing behaviour.
Warning about using non-specific shocks or forks.
Note on bolt type, size, and torque before removal.
Removing rear wheel, crankset, and disconnecting seatstay/linkage pivot.
Procedure to remove the lower shock cover.
Remove lower shock bolts and disconnect the TC Cable.
Rotate linkage to access the upper shock bolt.
Remove shock, ensure correct torque and threadloc on re-installation.
Diagram illustrating internal cable routing for the rear derailleur.
Diagram showing internal routing for the rear brake hose.
Illustration of internal cable routing for the dropper seatpost.
Diagram showing internal routing for the Twinloc system.
What the warranty covers for frames, swingarms, and forks.
Information on warranty period, required maintenance, and transferability.
List of conditions and defects not covered by the limited warranty.
Procedure for notifying SCOTT and returning products for inspection.
Disclaimer regarding information accuracy, updates, and availability.
Contact information for SCOTT Sports SA, including address and web.
To Next Page
General
