Need help?Do you have a question about the SCOTT Foil Di2 and is the answer not in the manual?
Highlights the lightweight, aerodynamic characteristics and stiffness of the new FOIL bike.
Details the wiring diagram and setup for Shimano Di2 electronic shifting components.
Guide to assembling the Syncros Aero RR1.0 Cockpit and initial cable routing.
Instructions for installing the Di2 junction box and brake levers on the handlebar.
Guide for installing headset components, spacers, and mounting the cockpit onto the steerer.
Procedure for cutting the steerer tube and installing the headset expander.
Completing cockpit installation and routing main cables through the frame.
Steps for mounting the rear derailleur and connecting internal Di2 junctions.
Instructions for installing the front derailleur and securing the internal Di2 battery.
Connecting Di2 wires to the seatpost battery and routing brake cables.
Procedure for installing the seatpost clamp, seatpost, and mounting the saddle.
Installing the internal junction box, bottom bracket, and rear brake.
Mounting the front brake, installing the crankset, and shortening the chain.
Steps for installing the front and rear wheels and applying handlebar tape.
To Next Page
General
