For the set up of the front fork please use the fork spe-
cific manual attached to the bike .
Front Fork Set Up: Pivot Maintenance:
The pivot and bearings on SCOTT G-Zero Endurance/Sports-
woman are extremely easy to maintain.
An external treatment with a grease sprayafter every
bike wash is all you have to do. We do not recommend
heavy grease sprays since these will leave a film on the
parts which is difficult to remove. We recommend the
same for the chain also.
If you have to change the bearings you can order them
included to a service kit at your local SCOTT dealer with
parts number 15.1.860.101.0.000. In addition you can buy
them at a hardware store with international parts number
3803.2 RS.
In case of a change of the bearings or of the rear swin-
garm you should contact your local SCOTT dealer there-
fore you need special tools for disassembly and assembly.
set of bearings
G-ZERO ENDURANCE/
S
PORTSWOMAN
6-7
G-ZERO ENDURANCE/
SPORTSWOMAN
To Next Page
Loading...
