The pivot and bearings on SCOTT Genius MC are extre-
mely easy to maintain.
An external treatment with a grease spray after every
bike wash is all you have to do. We do not recommend
heavy grease sprays since these will leave a film on the
parts which is difficult to remove. We recommend the
same for the chain also.
If you have to change the bearings you can order them
included in a service kit at your local SCOTT dealer with
parts number 15.1.860.401.0.000.
In case of a change of the bearings or of the rear swin-
garm you should contact your local SCOTT dealer therefo-
re you need special tools for disassembly and assembly.
OWNERS MANUAL
For the set up of the front fork please use the fork spe-
cific manual attached to the bike
Front Fork Set Up Pivot Maintenance
OWNERS MANUAL
06-07
manual MC-Serie_ A5 _E 30.09.2003 15:13 Uhr Seite 8
To Next Page
Loading...
Need help?
General
