GB-
7
Search functions
Skip to next/ previous track
1. Press the button to skip to the next track.
2. Press the button to skip to the previous track.
Fast forward/backward
During playback, hold down the or button to go fast backwards or forwards
and then release the button. Normal playback will resume from that point.
REPEAT playback
Press the REPEAT/MEM-DN button repeatedly to select repeat playback mode:
Press it once to repeat the current track. “REPEAT” is displayed. Press it twice to
repeat all the tracks. “REPEAT ALL” is displayed. Press it a third time to cancel
the repeat function.
PROGRAM playback
This function allows you to program up to 20 tracks to be played in the desired
order.
Note: Programming can only be performed when playback is stopped.
Programming CD tracks
1. In STOP mode, press the MEM/CLK button and the track number “01” will
flash.
2. Press the / buttons to select a track number.
3. Press the MEM/CLK button to confirm.
4. Repeat steps 2 and 3 to program other tracks.
5. To play the program, press the button.
6. To clear the program, press the button twice, remove the CD or go to
standby mode.
RANDOM playback
Press the SHUFFLE button on the remote control to play the tracks in random
order. Press the SHUFFLE button again to cancel the function.
PLAYING AN iPod AND CHARGING THE INTERNAL iPod
BATTERY
Installing an adapter on the iPod docking station
1. Select the iPod adapter supplied with your iPod.
2. Place the adapter on the docking station at the top
of the unit with the two tabs facing forwards.
3. To remove the adapter, press the back of the
adapter and pull it up.
To Next Page
Loading...
Need help?
General
