2023 LUMEN eRIDE | ENGLISH 6
|
LUMEN eRIDE
LUMEN eRIDE
SAG ADJUSTMENT
01 02
Wear your normal riding gear, set the
sage meter to zero & the twinloc in
the open position.
If the sag value is not to your liking
within the sag range indicated, adjust
the shock pressure as indicated above.
You may need to use this specific valve
extender depending on which shock
pump you have.
297520
Gently sit on the bike allowing the
sag meter to move. Once completed
dismount the bike gently. Check the
value.
SCO eRIDE REAR SHOCK VALVE
EXTENDOR 23
To Next Page
