2023 LUMEN eRIDE | ENGLISH 5
|
LUMEN eRIDE
It is important to install the headset correctly
depending on the set up required. There are
two types of headset cups.
0° & 0.6° ( 64° & 65°) These can be indentified
from the stamp on the inner surface of the
headset cup.
The headset is available in two options:
288251 SYN HEADSET ZS56/28.6-ZS56/40 MTB
290060 SCO HEADSET CUP KIT SPARK 22
Do not use a standard headset tool
to remove these plastic headset
cups.
LUMEN eRIDE
HEADSET ADJUSTMENT
Slacker
Steeper
To Next Page
