MECHANICS HINT
This pivot position combines perfect climbing uphill
with optimum freeride function on the downhill.
Priority while designing the Nitrous was to find a per-
fect hardcore Freeride/DH-bike.
SCOTT decided to use the pivot position of the swin-
garm of the Octane 2000-2002 which is already well-
known and highly appreciated by independent bike
magazines.
CONCEPT
GEOMETRY
TECHNICAL DATA NITROUS
The direct and straight cable system on all our full
suspension models allows Smart Cable Routing which
is very resistant against water and dirt.
To change the cables simply unscrew and open the three
cable brackets on the downtube.
The outer housing of the cables can also be fixed
on the bottle cage with cable fixers, the two brackets
below the cage are not needed anymore.
SCOTT SMART CABLE ROUTING
2
1
Size
Small
Medium
Large
Travel 195 mm
Shock (Eye to Eye) 200 mm
Hardware Mainframe 22,2 mm x 6 mm, screw length 40 mm
Hardware Swingarm 22,2 mm x 6 mm, screw length 36 mm
Seatpost Ø 34,9 mm
Headset 1,5"
Fork travel 200 mm / 170mm
Fork length 575 mm
BB housing 73 mm
Front derailleur Topswing 31,8 mm Toppull
Chainguard ISCG Standard
Bearings 61803 2RS 17x26x5 4 St.
Headangle HT Length TT Horizon Seatangle Top ST CST Length BB OS
67° 110 560 73.5° 450 432 + 25
67° 115 585 73.5° 470 432 + 25
67° 120 610 73.5° 490 432 + 25
Smart cable routing
OWNER’S MANUAL 2007
ENGLISH
03
02
DEUTSCH
FRANÇAIS
Some bikes of the Nitrous series are equipped with
a telescope seatpost which offers a wider adjustment
range of the seatheight.
In case you want to upgrade your Nitrous with the
telescope seatpost you can order it at your local
Scott dealer with article number 15.1.844.405.0.349.
ADJUSTMENT OF SEAT
POST-HEIGHT
3
T
elescope seatpost
IMPORTANT!
The seatpost has to be brought
into the seattube at a minimum of 100 mm
and must not stick out more than 25 mm
at the bottom end.
To Next Page
Loading...
Need help?
General
