Scotts LPS40820S - User Manual

OWNER’S MANUAL
CORDLESS 20 VOLT POLE SAW/LITHIUM-ION BATTERY PACK
Copyrights. All Rights Reserved.
Model LPS40820S
Your pole saw has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the owner’s manual before
using this product.
Thank you for your purchase.
DO NOT RETURN THIS PRODUCT TO THE STORE. OPERATING, ASSEMBLY, PART,
SERVICE QUESTIONS? GO TO SCOTTS.AMERICANLAWNMOWER.COM OR CALL
1-800-618-7474 BETWEEN 8:00AM-5:00PM EST FOR ASSISTANCE.
SAVE THIS MANUAL FOR FUTURE REFERENCE
ADD OIL TO OIL RESERVOIR BEFORE FIRST USE
BATTERY MUST BE CHARGED
BEFORE FIRST USE. TWO TO
THREE INITIAL CHARGING/
DISCHARGING CYCLES MAY BE
REQUIRED TO ACHIEVE
MAXIMUM RUN TIME/CAPACITY.
CA Compliant
Charger Included
(Model No.
CHL82000)

Summary

Important Safety Warnings

General Power Tool Safety

Covers work area, electrical, personal safety, and tool use/care guidelines.

General Safety Guidelines

Environment, Dress, and Protection

Instructions on avoiding dangerous environments, proper attire, and PPE.

Safe Operation Practices

Covers battery removal, preventing accidental starts, and keeping bystanders clear.

Operational Safety Precautions

Alertness and Tool Inspection

Emphasizes staying alert, using common sense, and checking for damaged parts.

Battery Specification

Specifies the correct battery type and size (BL82120) for the tool.

Product Features and Assembly

Product Specifications

Details input voltage, bar length, weight, extended length, and oil capacity.

Unpacking Instructions

Guide for carefully removing product, checking list, and inspecting for shipping damage.

Assembly Procedures

Pole and Telescopic Pole Adjustment

Instructions for assembling the pole sections and adjusting telescopic length.

Guide Bar and Chain Installation

Steps and safety warnings for installing or replacing the guide bar and chain.

Chain Adjustment and Maintenance

Chain Tensioning

Procedure for adjusting chain tension, ensuring proper slack and tightness.

Fluid Filling and Operation

Cutting Chain Oil Filling

Instructions for filling the chain oil reservoir with appropriate oil.

Starting and Operating the Tool

Procedure for installing/removing battery pack and turning the tool on/off.

Operating Techniques

Kickback Prevention

Precautions to minimize kickback risk: firm grip, clear area, full speed, gloves.

Cutting and Pruning Procedures

Guidelines for basic cutting, limb removal, and pruning small branches safely.

Chain Maintenance and Sharpening

Sharpening Cutters

Guidance on filing cutter angles, depth gauge clearance, and file selection.

Filing Angle Specifications

Details correct top plate (30 deg) and side plate (80 deg) filing angles.

Battery Management

Charging the Battery Pack

Instructions for charging the battery pack, indicators, and storage recommendations.

Battery Disposal and Recycling

Information on proper disposal and recycling of lithium-ion battery packs.

Maintenance and Troubleshooting

Lubrication and Guide Bar Care

Covers oil system, guide bar maintenance, and cleaning procedures.

Troubleshooting Common Issues

Lists problems, possible causes, and solutions for unit operation issues.

Parts and Service Information

Repair Parts Listing

Catalog of available repair parts with item numbers, descriptions, and quantities.

Scotts Warranty Policy

Warranty Coverage and Limitations

Details warranty period, exclusions, limitations, and claim requirements.

Scotts LPS40820S Specifications

General

Power Source	Battery
Battery Voltage	40V
Bar Length	8 inches
Cutting Capacity	Up to 6 inches
Battery Type	Lithium-Ion
Chain Pitch	3/8 inch