Scotts PS45010S User Manual

OWNER’S MANUAL
ELECTRIC POLE SAW
Copyright. All Rights Reserved.
This product has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the owner’s manual before
using this product.
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE
5006496
DO NOT RETURN THIS PRODUCT TO THE STORE. OPERATING,
ASSEMBLY, PARTS, SERVICE QUESTIONS? GO TO
SCOTTS.AMERICANLAWNMOWER.COM OR CALL 1-800-618-7474
BETWEEN 8:00 AM—5:00 PM EST FOR ASSISTANCE.
Model PS45010S
IMPORTANT ASSEMBLY NOTE:
The pronged side of the extension shaft should
be inserted into the pole saw handle.
Make sure the locking pin on the extension pole
is aligned with the arrow on the pole saw handle.

Scotts PS45010S Specifications

General

Type	Pole Saw
Power Source	Electric
Bar Length	10 inches
Voltage	120 Volts
Amperage	8 Amps
Adjustable Length	Yes
Chain Pitch	3/8 inch
Chain Gauge	.050 inch
Amps	8 Amps

Summary

IMPORTANT SAFETY WARNINGS

GENERAL POWER TOOL SAFETY WARNINGS

Essential safety instructions applicable to all power tools for safe operation.

POLE SAW SAFETY WARNINGS

EXTENSION CORD GUIDELINES

Recommendations for using extension cords, including gauge and condition checks.

DOUBLE INSULATION EXPLANATION

Details on the double insulation safety feature and its implications for grounding.

PRODUCT SPECIFICATIONS

POLARIZED PLUG SAFETY

Information regarding polarized plugs and their safe use with extension cords.

INSPECTING FOR DAMAGED PARTS

Procedures for checking the tool for damage before further use.