Why is my Scotts Lawn Mower engine hard to start?
A Scotts Lawn Mower engine might be hard to start due to a dirty air filter, a bad spark plug, a weak or dead battery, a dirty fuel filter, stale or dirty fuel, loose or damaged wiring, a carburetor that is not adjusted properly or is dirty, engine valves that are out of adjustment, or if the temperature is below 32°F (0°C).
What causes a Scotts S1742 Lawn Mower to have an uneven cut?
An uneven cut with your Scotts Lawn Mower can be caused by several factors: the mower not being level, travel speed being too fast, blades being dull, bent, or loose, mower gauge wheels not adjusted correctly, a buildup of grass, leaves, and trash under the mower, or a bent blade spindle.
Why does my Scotts S1742 Lawn Mower have poor engine performance?
Poor engine performance in your Scotts Lawn Mower can occur due to several fuel-related issues. It might be caused by dirt in the fuel system or old fuel. Replacing the fuel with fresh, stabilized fuel is a suggested solution. Fuel blended with alcohol or ether can also lead to gum and varnish deposits, particularly if stored for extended periods; in this case, it's advisable to obtain fresh fuel. If you suspect fuel quality, try obtaining fuel from another supplier.
Why Scotts Lawn Mower losing power?
Your Scotts Lawn Mower may be losing power due to several factors: cutting too much grass or cutting too fast, an incorrectly adjusted choke, a buildup of grass, leaves, and trash under the mower, a dirty air filter, low or dirty oil, a faulty spark plug, a dirty fuel filter, stale or dirty fuel, water in the fuel, a loose spark plug wire, a dirty engine air screen or fins, a dirty or clogged muffler, loose or corroded electrical connections, or a carburetor that is not adjusted properly or is dirty.
Why does Scotts S1742 Lawn Mower engine continues to run when operator leaves seat?
The engine of your Scotts Lawn Mower continuing to run when the operator leaves the seat indicates a faulty operator presence safety switch. Suggested solution: Faulty operator presence safety switch.
Why Scotts S1742 Lawn Mower blades scalping grass?
Scotts Lawn Mower blades may scalp grass due to cutting too low, turning speed being too fast, ridges in the terrain, rough or uneven terrain, low tire pressure, mower gauge wheels not adjusted correctly, or bent blade(s).
Why Scotts S1742 Lawn Mower starter does not work?
The starter on your Scotts Lawn Mower may not work because the brake pedal is not depressed, the mower engagement lever is in the engaged position, the battery terminals are corroded or the battery is not charged.
Why Scotts S1742 belt slipping?
Belt slippage in your Scotts Lawn Mower can be caused by debris in the sheaves or a worn belt.
Why Scotts Lawn Mower lights do not work?
If the lights on your Scotts Lawn Mower do not work, it could be due to a loose or burned-out bulb, loose or damaged wiring, or a blown fuse.
Why Scotts Lawn Mower battery will not charge?
If your Scotts Lawn Mower battery will not charge, it could be due to a dead cell in the battery, dirty battery cables and terminals, or a faulty regulator/rectifier.
Explains the manual's purpose, value, and how to use it for safe and effective operation.
Highlights safety alert symbols (DANGER, CAUTION) and their meanings for hazard awareness.
Instructions for locating and recording product model and serial numbers for service.
Explains the meaning of DANGER, WARNING, and CAUTION safety alert symbols.
Warning about hazardous substances like sulfuric acid and explosive gases from the battery.
General warning to avoid severe hazards and potential death by following safety guidelines.
Warning about hazards from rotating blades and thrown objects during operation.
Specific warning regarding hazards associated with rotating mower blades.
Essential guidelines for safe operation of the machine.
Step-by-step procedure for safely parking the tractor.
Emphasizes the severe dangers posed by rotating mower blades.
Guidance on preventing tip-over accidents, especially on slopes.
Safety rule prohibiting riders on the tractor or attachments.
Safety precautions to follow before and during machine maintenance.
Precautions for safe tire maintenance, mounting, and inflation.
Guidelines and precautions to prevent fire hazards related to fuel and maintenance.
Proper procedures for handling and disposing of waste products and chemicals.
Essential checks to perform before each operation for safety and performance.
Identification and location of various controls on the operator station.
Procedure for adjusting the mower deck's cutting height.
Instructions for adjusting the mower deck gauge wheels.
Procedure for leveling the mower deck from side to side.
Procedure for leveling the mower deck from front to rear.
Procedures to test critical safety interlock systems.
Procedure to test the mower engagement lever safety switch.
Procedure to test the operator presence seat switch.
Procedure to test the park brake switch functionality.
Instructions on how to lock and unlock the park brake.
Step-by-step guide for starting the tractor's engine.
Procedure for safely shutting down the engine.
Operation of forward and reverse controls for gear transmission.
Operation of forward and reverse controls for automatic transmission.
Instructions for engaging and disengaging the cruise control feature.
Procedure for using the Reverse Implement Option (RIO).
Instructions for operating the mower deck lift lever.
General instructions for operating the mower deck.
Steps to set up the 42-inch mower deck for side discharge operation.
Guidance on selecting the correct mower blades for different conditions.
Steps to set up the 42-inch mower deck for mulching.
Instructions on how to manually push the machine.
Guidelines for safely loading and transporting the tractor on a trailer.
Information on the use of wheel weights for added stability.
Recommendations for achieving optimal lawn cut quality and appearance.
Information on how to obtain parts catalogs and technical manuals.
List of specific part numbers for various components and their availability.
Overview of maintenance schedules and factors affecting service frequency.
Essential checks to perform before operating the machine.
Detailed maintenance schedule based on operating hours and seasons.
Procedure for lubricating the front wheel bearings on the 2046 model.
Procedure for lubricating the front wheel spindles.
Safety precautions regarding engine exhaust fumes and ventilation.
Procedure for checking the engine oil level and important considerations.
Step-by-step instructions for changing the engine oil and oil filter.
Procedure for cleaning engine air intake screen and cooling fins.
Maintenance steps for the air cleaner elements on the S1642 model.
Maintenance steps for the air cleaner elements on the S1742 model.
Maintenance steps for the air cleaner elements on the S2046 model.
Procedure for checking, cleaning, and adjusting spark plugs.
Instructions for safely replacing the fuel filter.
Procedure for adjusting the brakes on gear transmission models.
Procedure for adjusting brakes on automatic hand control models.
Procedure for adjusting brakes on automatic foot control models.
Step-by-step instructions for removing the mower deck.
Step-by-step instructions for installing the mower deck.
Procedure for replacing the mower drive belt.
Procedure for adjusting the tension of the mower drive belt.
Procedure for checking and adjusting the mower spindle brake.
Maintenance procedures for mower blades on the 42-inch deck.
Method for checking mower blades for damage or bends.
Procedure for installing mower blades correctly.
Maintenance procedures for mower blades on the 46-inch deck.
Instructions on how to sharpen mower blades.
Procedure for balancing mower blades after sharpening.
Instructions for checking the battery's condition and charge.
Steps for safely removing and installing the tractor battery.
Procedure for cleaning battery terminals and posts to ensure good connection.
Instructions for jump-starting the tractor battery using a booster battery.
Procedure for replacing a defective headlight bulb.
Procedure for locating and replacing a blown fuse.
Instructions for properly filling the fuel tank with fuel and stabilizer.
Guidelines for cleaning and repairing minor scratches on plastic surfaces.
Procedures for cleaning and repairing minor scratches on metal surfaces.
Safety precautions to follow when storing the machine, especially regarding fuel.
Steps for preparing the machine before placing it in storage.
Procedures for preparing the fuel and engine for long-term storage.
Steps to prepare the machine after it has been in storage.
Technical specifications for the Scotts Lawn Tractor Model S1642.
Technical specifications for the Scotts Lawn Tractor Model S1742.
Technical specifications for the Scotts Lawn Tractor Model S2046.
Specifications related to the electrical system of all models.
Fluid capacities for fuel, oil, and crankcase for all models.
Physical dimensions including height, length, and width for all models.
Specifications for the 42-inch mower deck.
Specifications for the 46-inch mower deck.
Recommendations for engine oil and grease types.
Lists the components included in the parts bag for assembly.
Procedure for connecting the tractor battery.
Preparation steps specific to the 42-inch mower deck.
Instructions for checking and adjusting tire pressure.
Details the warranty terms for new Scotts Brand Products sold in the U.S.
Details the warranty terms for new Scotts Brand Products sold in Canada.
Explains the emission control system warranty for small off-road gas engines.
Outlines the owner's rights and responsibilities under the warranty.
Details the owner's responsibilities for maintaining warranty coverage.
Specifies the duration of warranty coverage for different parts.
Information on how to obtain warranty service and any associated charges.
Warranty coverage for parts subject to scheduled maintenance.
States the limitations on John Deere's liability under the warranty.
Instructions on the process to obtain warranty service.
Details the warranty for free battery replacement within 90 days of purchase.
Clarifies that dealers do not provide their own warranties or modify terms.
First step in resolving questions or problems by consulting the operator's manual.
Second step: discuss issues with the authorized servicing dealer's staff.
Third step: contact the Customer Communications Center if issues persist.
General| Cutting Width | 42 inches |
|---|---|
| Deck Material | Steel |
| Engine Type | Briggs & Stratton |
| Speed | 5.5 mph |
| Warranty | 2 years |
| Transmission | Automatic |
To Next Page
