EasyManua.ls Logo

SCS 2600 - Specifications

SCS 2600
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PAGE 44
12. TROUBLESHOOTING GUIDE
Oil does not come out
14. TECHNICAL SPECIFICATIONS
Power unit:
Displacement (cm3): .............................................. 25.4
Fuel: ................ Mixture (Gasoline 25 : Two-cycle oil 1)
Fuel tank capacity (cm3): ........................................ 230
Chain oil: .......................................................SOCHAIN
Motor oil:................................................. SAE# 10W-30
Oil tank capacity (cm3): .......................................... 160
Carburettor: ........................................Diaphragm type
lgnition system:: .......................................... Solid State
Spark plug:...................................................... NGK L7T
Oil feeding system: ......................... Mechanical pump
Max. speed ............................................. 12,500 (min-1)
Idle speed ................................................. 2,900 (min-1)
Dimensions (L x W x H) (mm): ............ 265 x 220 x 220
Dry weight
Power unit only (kg): ............................................... 2.9
Power: ......................................... 0.9/8,500 (kw/min -1)
Cutting head:
Sprocket: .................................................................. 6T
Chain speed at max. power ......................... 17.1 (m/s)
Guide bar
Type: ................................................ Sprocket nose
Size (in. (cm)): .............................................. 10 (25)
Saw chain
Pitch (in. (mm)): ........................................ 3/8 (9.53)
Gauge (in. (mm)): ................................... 0.05 (1.3)
Specifications are subject to change without notice.
WWW.SGS-ENGINEERING.COM
CALL FOR ASSISTANCE: 01332 576 850